View Single Post
  #29  
Old 09-08-2015, 02:31 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

The problem was they twisted all the grounds together then soldered them. The twisted wires were too thick for the solder to penetrate leaving the inner wires non soldered. They loosen up after time which created resistance, heat and eventually burned wires and bad grounds. I prefer a ground strip. A bit more space and a few cents more. You can do it their way but the solder connection has to be solid throughout.
Reply With Quote