View Single Post
  #6  
Old 09-06-2015, 01:17 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Couldn't make out your pics, they were dark and fuzzy. Try re posting the pics with some more light. I believe you said it run out of gas and you refueled and would not start after that. How old was the gas? Keep in mind fresh gas means it was purchased from a station that moves a good amount of gas and hasn't set up in the can for more than 2 weeks. If the gas is clear it's good if yellow it's bad. This is if your using regular ethanol branded gas. I will not use ethanol blended gas in anything carbureted. Last you had mentioned that after adjusting the valves gas started coming out of the exhaust. Sounds like you did not have the engine on top dead center. With piston at top of cylinder the lobes on the cam should be pointing downward, 2 slash marks on cam sprocket should be parallel with top of head and large hole in cam sprocket should point strait up. Oh and one last thing, if engine is cranking the solenoid is good.
Reply With Quote