This is what happened. I was jump starting my buggy ( from my truck) to lawn and tractor battery in my buggy) and it was turning over but not firing. I realized it didn't have gas in it
Put in gas tried to jump start it again and ......Nothing.
Nothing at all. Dash didn't light up, starter didn't turn, nothing......
Could I have ruined something? If so what?
http://www.amsportworks.com/pdfs/LUT...al-14589R4.pdf
I have this for reference but still having trouble grasping it. (electrical is around page 66)
http://www.youtube.com/watch?v=BSZ3t_oibeA
I watched and tried this but I
don't have digital multimeter and my buggy is DC powered.
I did have continuity in battery, in solenoid/starter relay. Took off cdi and regulator and they appear fine.
I did ground multimeter to frame and then checked continuity ( with key switch on) from all the female ends that come from regulator/rectifer, and CDI. There was continuity.
However when using my multimeter on either AC or DC setting it didnt do anything. like in vid his read x amount of ohms. weird.
Electrical and I don't get along
Any help would be appreciated guys
