300cpilot- I'd say the plugs don't fire at the same time as there is a firing ring and the there is 2 pick-up's. and they're not 180 degrees from each other based off the diagram I looked up. Plug gap is good (.28-.30), both coils are good (thru dummy test!),CDI is working properly when one cylinder isn't hooked up. With both plugs out and grounded the spark on #1 is as bright/loud a blue spark as you could ask for- the #2 fires bright the first stroke then nothing. If I disconnect #1 coil from the CDI-#2 fires bright everytime or normally.This tells me both pick up's are gapped correctly.It's got to be the stator is weak? Does anyone know how to check the high & low coils on the stator without removing it?
|