waiting on heims, so i figured i'd toy w/ the rack. i got rid of the stock tie rods and retapped the ends 1/2" 20 . then thought about how i wanted to make a clevis to accept 1/2" heims for the tie rods. i cut and drilled all of the pieces but went agianst my cardinal rule and free-handed the 1st one. hopefully duping the 2nd one wont be to tough. i ran a bolt through it , welded it and cut off the head and ground it down a bit prettied it up a little and threaded it in the end of the rack. simple enough..........til i start #2.