Hi all,
So I have undertaken a bit of a project to say the least
I bought 2 buggies from ebay. 1 small one and 1 er big one
The small one resembles a hammerhead (which was a 50cc) and the big one is a Sahara (Kinroad?) with a GY6 engine not sure engine size yet.
You will notice the GX200 engine on the back of the small one
Here is the before pictures:
big buggy before.jpg
Small buggy before.jpg
And here is the small one as it is now:
small buggy after all.jpg
small buggy after back.jpg
The Engine was completely seized so needed a complete tear down (and I removed the Governor at the same time).....
The springs had faded so resprayed them, the whole frame was powder coated white
(Its for my 10 year old nephew)....
The clutch had rusted so I got a maxtorque clutch (and a new chain)...
The Engine needed realigning so had to re-drill the engine mounts....
The Seat had been chewed by a dog so a new one is on the way
....
The Brake cable and throttle cable had snapped, so made 2 new cables....
The tyres had punctures so put innertubes inside them :S....
The petrol tank was in the way of the suspension travel, so moved it above....
That is only the small one. I am just embarking on the big one, and have only just worked out it is a GY6 engine. The ignition system and switch looks destroyed,
so if anyone has any advice how to get her started with just a battery in the meantime that would help LOADS!!!!I thought I should also say hi as I have already looked at the wiring diagram someone posted, so I imagine I'll be on here a bit!
Hopefully see some of you around the forums
