Thanks Ckau. If you look at post #6 at the beginning of this thread, you can see I welded 1/4" gussets and a plate on the bottom of the frame mount to reinforce that point.
Not to say it or the bulkhead cannot be out though, but is something I do need to look into.
I do appreciate your input on this and like the idea of using the plywood to check and square the frame and such. Looks like I will be recruiting some help in this matter.
Thank you to all who have helped thus far.
I would also like to say thank you very much to Ckau for his help with the heim joints conversion. You do great work.
|