The shocks on the rear are the same make/brand as the ones on the front only longer and larger in diameter. I'm a little concern if these will even work or not. I haven't touched the shocks other than to unpack them and bolt them on. Just by bouncing on the frame the fronts are too soft with not enough travel . The rears appear to be too stiff. I really won't know until the buggy is drivable. I had always intended using these shocks for mock up and to give an idea of what was needed when it got time to get some real shocks. I'll fiddle with the preloads and gas settings to hopefully get them close.
|