Disconnect both leads from your battery, check how many volts it has. A fully charged battery should be around 13.2-13.7 volts. If low, charge the battery to full charge. Now not sure what type battery you are using but if it is a factory spec battery for your buggy you do not want to put more than 1.5 amps 2.0 max amps or you will ruin the battery. If the battery won't take a full charge or if after a full charge it reads 12v or lower after sitting not connected for 1 hour than you will have to replace the battery. You must determine the condition of the battery to go any further with checks. Don't take any short cuts when checking the battery both wires to battery should be disconnected from battery this will eliminate the entire system and you will be checking the battery only.
Last edited by SYCARMS; 10-17-2017 at 09:22 AM.
|