Speedometer fuel gauge and accessory wiring
Guys, I have looked around for days and cannot find a wiring diagram for a Roketa Predator 150. Or any other 150 buggy with these accessories. Just the usual engine, lights, and MAYBE a horn, but that's it.
I picked up a Roketa project buggy. It has a Yerf engine in it. The previous owner hacked the wiring together, but it worked. HOWEVER, there are cut wires (and missing connectors) for the speedo sensor on the axle and the fuel float sender in the gas tank.
I have tried tracing the wires back from the instrument cluster with no luck. They like to change wire colors at the plastic connectors. And I'm afraid of frying something just because I touched two wires together in hopes of finding the right combo.
If anyone has a wiring diagram, or a Roketa and could trace out these wires for me, I'd be your best friend. Plus you'd be a HUGE savior to anyone else looking. There is NOTHING out there for these accessories.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
|