Did some rewiring tonight on the harness.
Cleaned the float needle and fixed the leaking gas issue. Bad thing was the paint bubbled in about 6-7 places and started leaking gas. I've got pin holes in the tank now. Drained the gas, blew the tank dry and then used a dremel to clean the paint off and soldered the holes. Seems okay now. Got it back together and started it up and ran it around the yard. It ran well for about 3 minutes. Then it would idle but when given gas it would rev up a little and died down but didn't die, no power at all. Fuel starved or flooding out?
I'm getting closer and not giving up.
|