View Single Post
  #19  
Old 09-03-2015, 09:42 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Not sure what you mean, took pliers and hit the pos. and neg. on solenoid? You have a heavy wire from the battery to the solenoid and another heavy wire from solenoid to starter. Jump across those 2 wires at the solenoid and if starter spins the problem will be with either the ignition switch or the solenoid. If starter does not spin than run a heavy jumper wire from the battery directly to starter terminal. If starter spins then check for an open or corrosion in the heavy wires, if not , the starter is bad.
Reply With Quote