View Single Post
  #15  
Old 08-31-2017, 07:44 PM
Sk8almost44's Avatar
Sk8almost44 Sk8almost44 is offline
Lite Contributor
 

Join Date: Aug 2017
Posts: 39
Default

Took the black plastic off.
Removed the tention piece held by two bolts.
Removed the piece holding the valves (4 bolts).
Aligned the flywheel to TDC.
Alligned the gear for TDC.
Measure .004 gap.
Reset the tension using a flathead.

Fires up, but not an easy start. May recheck the gaps again.
I have to give it gas.

The exhaust is not connected, very loud! Has a metal shield around where it is not connected

Took the gear out of neutral to forward, works.
reverse does not work.
Attached Images
File Type: jpg IMG_0902.jpg (92.8 KB, 5 views)
Reply With Quote