View Single Post
  #1  
Old 08-31-2017, 09:56 PM
jpcjguy jpcjguy is offline
Lite Contributor
 

Join Date: Mar 2016
Location: Richmond, VA
Posts: 63
Default 58.5mm kit installed and a lot of vibration

Hi all,

So I have a Kandi Sypder that I picked up for cheap. I got it running and it smoked like a son of a gun. Figured rings. So I bought one the kits - decided on a 58.5mm kit. First time ever doing something like this.
New to buggies in general. Got it all back together and it ran!
Followed these instructions for the most part - http://www.thejunkmanadv.com/uploads...gy6_engine.pdf

At idle the thing vibrates big time. I don't recall it doing this before I did the kit, but then again I only fired it up a few times for about 5 - 10 minutes and that was 4-5 months ago (busy summer).

Here is a video I took - can't really tell vibration but maybe the sound helps:
https://drive.google.com/open?id=0B7...XdkZmtKZE02b0k

Oh - I also put in new roller weights and springs - but I did that before I did the big bore kit.

Any thoughts? What type of things should I check? I did a quick compression test and got it up to 160psi several times. Could something in the CVT come loose/seize up?

Thanks!
Joe
Reply With Quote