View Single Post
  #3  
Old 11-03-2011, 11:56 PM
T3beatz's Avatar
T3beatz T3beatz is offline
Heavy Contributor
 

Join Date: Oct 2011
Location: St. Louis
Posts: 650
Default

Quote:
Originally Posted by metalstudman1 View Post
If it's not a fuel delivery issue (check fuel line for cracks, pulse hose for a good seal on the valve cover and no cracks, trash in the tank or a bad gasket @ the carb) I'd be checking my coil,kill switch or ground connections since it only does it when being bounced and rattled.I think you mean't to say you disconnected the govenor- to remove it you have to open up the engine.
Yeah, that's what I did, I opened up the engine to remove the governor weights and the little hammer thing that pushes on the arm to limit RPMs.

Some guys say it might be the float bouncing around in the carb, I don't know quite how it works... they say you can get an extra spring to limit the bouncing (I might give that a try) but first I'm gonna check all the electrics and make sure everything is tight.
Reply With Quote