|
|
|
|||||||
| Other tech issues For all other technical issues. Think frame, suspension, steering, brakes, etc |
|
|
Thread Tools |
|
#1
09-16-2016, 07:00 PM
|
|||
|
|||
Front end alignment
I have followed the procedure in my users manual to align the front end of my carbide but it still pulls to the left. Nothing looks broken or bent on the suspension. What am I missing?
|
|
#2
09-17-2016, 10:08 AM
|
||||
|
||||
Inflate tires to specified psi. , than measure circumference ( not height ) and compare front pair , and rear pair for difference . Not uncommon to find two same type and size tires with different measurements . Adjust by air pressure .
 Or is the suspension unequal side to side , weight distribution ( driver / no passenger ) might have to adjust shock spring rate , or swap shocks left to right or vise / versa .
__________________
2011 BMS KING COBRA 150 Sold YERF DOG SPIDERBOX's Sold YERF DOG 3203's. Sold MANCO SILVER FOX. Sold 2009 POLARIS 500 HO SPORTSMAN 4X4 2002 POLARIS 500 HO SPORTSMAN 4X4 2000 POLARIS MAGNUM 2X4 HALF A DOZEN CHEVY 4X4's NEED-MO-BUGGY
Last edited by OLDKID; 09-17-2016 at 10:16 AM. Reason: detail detail |
|
#4
09-17-2016, 03:40 PM
|
||||
|
||||
|
Most ATV tires are anywhere from 5 - 15 lbs. psi. Buy a low pressure tire gauge . Uneven air pressure will surely make it pull .
 And that goes for the rear tires as well .
__________________
2011 BMS KING COBRA 150 Sold YERF DOG SPIDERBOX's Sold YERF DOG 3203's. Sold MANCO SILVER FOX. Sold 2009 POLARIS 500 HO SPORTSMAN 4X4 2002 POLARIS 500 HO SPORTSMAN 4X4 2000 POLARIS MAGNUM 2X4 HALF A DOZEN CHEVY 4X4's NEED-MO-BUGGY
Last edited by OLDKID; 09-17-2016 at 03:42 PM. Reason: detail |
|
#5
09-18-2016, 05:06 PM
|
||||
|
||||
|
old kid gave all the best advice already to look for. good job old man lol
__________________
Hammer head Single seater know as herbie under construction Aluminum fuel tank, aluminum wheels, custom fuel/cargo rack, entire rewire, trail tech vapor, ported big valve head, a12camshaft, 12 gram sliders, straight intake, kirkey wide seat, front end extension. 4 point harness, welded cage. Hammerhead exhaust. Blade Single Seater Restore welded cage, engine build, new wiring harness/electric box, spun aluminum fuel tank. |
|
#6
09-18-2016, 05:27 PM
|
||||
|
||||
|
Quote:
Yep! the rears are just as important as the front. Air pressure in the rear tires affects the circumference of the tire. More pressure means a taller tire. If the right rear has more air it will push to the left. It's an old dirt track trick, air down the inside tire makes it turn to the left a little better. Nowadays they call it "wheel stagger" On the family grocery getter you don't notice because of the limited slip differential. On a solid axle it's very apparent. |
| Thread Tools | |
|
|
