|
|
|
|||||||
| Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc) |
|
|
Thread Tools |
|
#1
08-02-2009, 04:46 AM
|
||||
|
||||
tires
what size tires do you suggest to upgrade to on the helix. my fronts are still the stock tires, i changed the rear tires but they are the same size. i want a little more ground clearance but dont want to loose a lot of speed. what can i go with.
|
|
#2
08-02-2009, 01:00 PM
|
||||
|
||||
|
Take a look at the pic below. This is my old Helix. because of the clearance, you have to stick with the stock tires up front however in the rear, you can bump them up quite a bit. The rims you see in the back here are Douglass 10" rims (vs the stock 8") and the tires are 20's. Just look for rear rims/tires for a Honda 400 EX or 450R and the bolt pattern is the same. Not to mention I think I picked up 2 or 3 mph. The real benefit was that when it snowed, the stock tires won't do much for you, these however were excellent.
|
|
#3
08-05-2009, 01:33 AM
|
||||
|
||||
|
i havent put my maxxis 20's in the snow this year i will
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
|
#5
08-05-2009, 12:51 PM
|
||||
|
||||
|
To tell you the truth, I have always felt that the tire size on the Carbide is about perfect for it. Only thing I would change is I would go with a knobby style pattern like what booda72 has on his. Look at his photo album from his profile. I had similar on one of my Helix buggies and those tires were great.
|
|
#6
08-05-2009, 12:51 PM
|
||||
|
||||
|
Actually, just like the ones on my helix picture above. They were Dunlops.
|
|
#7
08-05-2009, 01:57 PM
|
||||
|
||||
|
i think the carbide shouldn't have the stock treads because the stock tiresonthe helix dont have alot of grip. but thats just my opinion.
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
|
#8
08-05-2009, 04:46 PM
|
||||
|
||||
|
here is what i did with mine
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 Last edited by 24evanwilson; 08-11-2009 at 01:55 PM. |
|
#9
08-22-2009, 10:40 AM
|
||||
|
||||
I just bought these for my buggy and I'm loving them.
What a difference.  Much smoother ride alsoFront Tires Kenda Front Max 20 x 7-8  Back Tires Interco Swamp Lite 22 x 11-10 
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10 |
|
#10
08-22-2009, 10:46 AM
|
||||
|
||||
|
Wow those are some honkers on the back! Looks pretty much like what is on the back of the coolster.
|
|
#11
08-22-2009, 10:53 AM
|
||||
|
||||
|
dang!1
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
|
#13
08-23-2009, 03:13 PM
|
||||
|
||||
|
Here's a thread on adding the fenders. You do need to weld the front mounts in place:
http://www.buggymasters.com/forum/showthread.php?t=106 |
|
|
