|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
||||
|
||||
Another dumb question.
My buddy just bought a Carbide 150 with 50 miles on it.
I built a track on my land, and I Smoke him. His speedometer never goes above ~25mph. He bought it used. How do I tell if the speed Restricion kit is installed? Thanks guys. |
#2
|
||||
|
||||
If I remember right, the kit is actually a spacer they put in the variator. Only way to know that for sure is to pull the side cover off and have a look. Or ask the people he bought it from if they had it put on.
|
#3
|
||||
|
||||
Thanks. Where is that at though.
|
#4
|
||||
|
||||
http://buggymasters.com/forum/showth...ghlight=modify check this out from Buggymaster
This should help explain |
#5
|
||||
|
||||
I believe the speed reduction kit is a modified CDI unit.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! |
#6
|
||||
|
||||
Also if you are driving that Helix in your avatar you should smoke him irregardless. There is quite a bit of weight difference in the 2 machines. Never heard of a speed restricted cdi just a rev limited one that cuts out at 8000rpms.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
#7
|
|||
|
|||
significant weight difference in riders too.....we'll see if he smokes me when I'm driving!
HA HA! |
|
|