|
|
|
|||||||
| Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc) |
|
|
Thread Tools |
|
#1
11-07-2010, 12:34 AM
|
|||
|
|||
Belt issue
Went trail riding with the helix yesterday. Was doing alot better with the new updates (10g rollers, 1500 spring, CDI no rev, coil, and 125# jet) But after riding it for about 30 minutes the belt went into shreds. Didn't even look like a belt. Not sure what happen or why. Belt had proble 70 hours on it. Was this do to being old or the upgrades. Should I have upgraded belt to? Any suggestions?
__________________
Katzinger Helix 150cc UNI Filter No Rev CDI 125 Jet 10g Sliders 1500 Springs |
|
#2
11-07-2010, 08:42 AM
|
||||
|
||||
|
i always change belt while doing mods-and at least once a year
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
|
#3
11-07-2010, 10:02 AM
|
||||
|
||||
|
If you go with the 10g it is certainly going to put a bit more stress on the belt. How old is the machine?
|
|
#5
11-07-2010, 09:01 PM
|
||||
|
||||
|
i just run std belts-but change them as needed-i will not run a kevlar belt at all
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
|
#6
11-08-2010, 01:03 AM
|
||||
|
||||
|
Also if your cvt cover still has the rubber boot on it take it of and use the clam and clamp a scotch brite pad in place of the rubber boot. This will allow for better airflow as well as you will be able to see when it need cleaned.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
|
#7
11-08-2010, 08:58 AM
|
|||
|
|||
|
those kevlar belts are alittle out of my price range for a belt anyway. Sounds like a good idea EJ Mac I will do that.. Thanks Guys!
__________________
Katzinger Helix 150cc UNI Filter No Rev CDI 125 Jet 10g Sliders 1500 Springs |
|
#8
11-08-2010, 05:51 PM
|
||||
|
||||
|
You will be just fine with the standard Gates Powerlink 743-20-30 Belt.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
|
#9
11-08-2010, 06:56 PM
|
||||
|
||||
|
this is how to modify your cvt intake- i use a folded washcloth & wash yearly or you can use a scotch brite pad
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
|
#11
11-14-2010, 01:01 PM
|
||||
|
||||
|
could a performance belt make a big difference? i think my belt is almost ready to give out and i need to get a new one. would it be worth $50?
__________________
heliX 150cc -uni filter -rotated tires -stereo -adjusted suspension -lights -soon hammerhead performance exhaust HELIX 
|
|
#12
11-14-2010, 05:46 PM
|
||||
|
||||
|
I don't see a belt adding any thing extra.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
|
|
