|
Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc) |
|
Thread Tools |
#1
|
|||
|
|||
Opinions on the Roketa GK-13B?
Does anyone here have any experience with a Roketa GK-13B? I know I've read reviews on other models that aren't very positive. However, I ran across one today in very clean condition for $800. I have my other buggy project going but figured this might be nice to have around for my wife and other people to drive around.
|
#2
|
||||
|
||||
i have a roketa gk-13 i like it a lot-good power stock easy to modify for more power
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#3
|
||||
|
||||
Good buggy great price get it. TOM
|
#4
|
|||
|
|||
I went and bought it. It's in great condition and looks like its never been off road....almost looks new. The turning radius is huge though. Is that normal for these?
|
#5
|
||||
|
||||
Yes they are a bit large on the turning radius. One thing to check is the toe-in, if not adjusted correctly it will increase the turn radius. You want to set the toe-in to 1/4" toed in. Due to not having a limited slip rear dif. you end up pushing the front tires around corners and it is magnified if tires are toed out instead of in. Tom
|
#6
|
||||
|
||||
Tom is right toe in should 1/8 to 1/4 inch-1/4 will turn better
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#7
|
|||
|
|||
Thanks for the information guys. I'll check and set the toe in.
|
#8
|
||||
|
||||
Have you set the toe and if so has it helped?
Tom |
#9
|
|||
|
|||
I tried to but something is really loose on one of the rod ends. After everything is tightened the right wheel has a lot of movement. I've been so busy building my 900cc Badland Buggy that I haven't even driven the Roketa since I posted this. I'm looking forward to warmer weather so I can get both of them out!
|
|
|