|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
|
Thread Tools |
|
#1
04-28-2011, 09:35 PM
|
|||
|
|||
150cc Carbide with No Power!! Help!!
I have a 150cc Carbide Go Kart that i bought off a buddy. This kart idles great, has no stumble or miss to it, but has no torque at all. I can be in a flat feild and it has a hard time pulling out. Now it runs fine on pavement but only has a top speed of around 15-20mph. Ive read on here for awhile and checked a few thing like jet size (34 and 114), air cleaner (uni-filter) , and exaust witch has been gutted and nothing has fixed it. The only thing i can think of that could possibly be the problem is the clutch. Any help would be greatly appriciated. thanks
|
|
#2
04-29-2011, 11:27 PM
|
||||
|
||||
|
The 114 jet with the uni and gutted exhaust is too small you should have somewhere around a 123 jet. How did it run for your buddy. I had just worked on a carbide with the same problem. It would only go 15-20 mph. It had the restricted cdi in it. ASW has this option for the younger kids. The restricted cdi will only allow the buggy to go 20 mph.
TOM |
|
|
