BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 250cc and Above Engine Tech

250cc and Above Engine Tech Technical Discussion Forum for 250cc and up Engines

 
 
Thread Tools
  #1  
Old 06-22-2011, 11:25 PM
utreracop utreracop is offline
Lurker
 

Join Date: Jun 2011
Posts: 1
Default 32mm carb issues

got me a 32mm carb for my hammerhead 250cc. can't get it to idle
  #2  
Old 06-25-2011, 08:04 AM
ckau's Avatar
ckau ckau is offline
Heavy Contributor
 

Join Date: Dec 2009
Location: central North Carolina
Posts: 915
Default

One or all of 3 factors cause your symptom.
-Fuel enricher not working. check for power and function . There are post here detailing how to check.
-Pilot and main jets too small. Most aftermarket carbs (e-bay) are pre-jetted for scooters unless you got the carb from a dealer specific to your model. What size pilot and main jets are in it? Start with a #40 pilot and a #48 main. These numbers are probably off but will get you close enough to fine tune.
- fuel delivery. you bumped up the consumption. So increasing delivery is needed . make sure you have vacuum to the tank shutoff valve. we always recommend doing away with that vacuum valve. Those valves are problematic. Use a manual shut off, thus eliminating the need for vacuum and guaranteeing positive flow, with 5/16th or larger line and a high volume/large capacity gravity feed fuel filter.
Get back if you still have problems or if you need resources for parts. Include make , model and where you purchased the carb when replying.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:49 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.