yerf dog 3206 tires

[bwomack524]

on my 3206 could i run thr rear tires on front and if possible where could i get a hub to fit ? Also what lenght shock could i use

[metalstudman1]

Do you have the original stock rear tires? Many ATV's have the same bolt pattern- guess you could cut the spindle & hub off one and weld a LONG extension on it. With the stock configuration/balljoint tabs you can only getaway with about 10-1/2" shocks before putting everything in a bind. IMO the stock rear tires wouldn't provide much grip for steering.

[bwomack524]

Thanks but I am having trouble finding used tires and rims for front I'm kinda on a beer budget. also do you know what hub to get 4x4 and I guess you need hub with bearing on them.

[ckau]

Northern Tool hs a good 4x4hub that will work .look in the trailer section. you will have to replace the stock 5/8 axle with a 3/4 axle as the hubs have 3/4 tapered bearing. use a 3/4x18x6 grade8 bolt for the axle. it will hold up well. I added zerk fitting for greasing them up.

[bwomack524]

In the pic. it looks like you have a beefup spindle can u buy one that fits the 3206 with a 3/4 axle?

[bwomack524]

will the axle just tap out? so you can put in the bolt

[jetboy300]

http://www.*************/item/4x4-Whe...ngs-260055-761
Get these, they work on stock 5/8 axle. You might have to get different axle spacers. You can always change the bearings if you upgrade to the 3/4 axle. The 5/8 inch axle tends to break off. You can then get a 1/4 inch plate welded to the face where the old one breaks off. Then you drill a 3/4 inch hole the through the spindle and get a 3 inch longer 3/4 inch bolt welded in.

[bwomack524]

will the stock rear rim fit on this? I thouhgt i needed the 4/110mm one. the standard 4" is alittle different right? I dont know. its so cool to get all these ideals. I want it to be slam-bam-thank you mam and your done with it, if you know what I mean

[jetboy300]

Get the 4x4 (bolt pattern)rims at Northern Tool. They are the 7x8(wide by diameter). They are very inexpensive. I'm sorry I'm drawing a blank. It's very late and I'm on and vacation. I'll post pictures and specs when I get back home. I just got all my parts in the mail last week to put big tires on the back of mine. I just bought a second Spider box last weekend and my step son wants all the mods on it like mine.

[GX150]

I used Polaris ATV 4/100 rear rims on the front of mine. 10x8 rims with 3+5 offset work well with 22x8-10 tires and you can even squeeze in 23x8-10 if the tread is not too aggressive.