ASW Carbide: It happened, again... - BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

joshstep1 · #1 08-25-2011, 11:10 AM

In March 2010, I messed up the gearbox on my Carbide, and I made the mistake of sending it to a local shop, where they had it for THREE MONTHS! It happened again about a week ago. I was riding around some farmlands. My question is this. What should I do? Part of me wants to try to fix it myself, but the other part of me is scared to try because I don't want to take the gearbox apart and not be able to put it back together. That part of me just wants to take it to the shop again... What to do, what to do...

metalstudman1 · #2 08-25-2011, 02:46 PM

Don't be scared of it!!! Take pictures of it as you take it apart.

joshstep1 · #3 08-25-2011, 04:46 PM

Well I'm afraid I will take the cover off and everything will fall out haha. I'm wondering if I will have to drop the engine out of it and if there's a fluid in the gearbox? If so, how do I take the fluid out?

RedTeam · #4 08-25-2011, 05:55 PM

whats the problem?

joshstep1 · #5 08-25-2011, 07:07 PM

Some of the transmission gears are broken

rich1 · #6 08-25-2011, 07:31 PM

So youre unscrewed if you fix it..

..and screwed if someone does ?

metalstudman1 · #7 08-25-2011, 09:31 PM

Try fixing it yourself first-Worst you can do is get an education!!! then if it's too much for you then get the SLOW guy to repair it.There should be gear oil in the gearcase. Look for a bolt at the rear towards the middle to bottom to drain.Without seeing your exact gearbox- most have a cover that will come off leaving all the shafts & gears intact when it's laying on it's side. If that means you need to remove the engine then so be it!

joshstep1 · #8 08-26-2011, 08:05 AM

NOOOO I don't want to remove the engine!! haha

metalstudman1 · #9 08-26-2011, 10:55 AM

The sooner you start the sooner you'll be grinning from success and driving it again. Right now doubt is your enemy!!!!

joshstep1 · #10 08-26-2011, 12:25 PM

Alright... I guess I'll start it tomorrow because I'll be busy the rest of today... and most of tomorrow too

RedTeam · #11 08-29-2011, 07:08 PM

you can do it

joshstep1 · #12 08-30-2011, 08:27 AM

I'm not so confident haha

**SYCARMS** · #13 08-31-2011, 03:19 AM

You don't have to pull the engine, do it right in the buggy in a clean location. You can get the repair manual from ASW website to download. These are not hard to do. Just one tip. Order a new cover gasket. The first one I had done I used a gasket maker instead of the gasket and the tranny locked up. After beating my head against the wall I realised that when I loosened the bolts everything worked great. The gasket is also a spacer so you need the gasket, no way aroung using one. The diagrams in their manual will show you how everything goes. So don't be afraid to tackle it.

TOM

joshstep1 · #14 08-31-2011, 07:39 AM

Well.... I DID IT!! I was amazed that it all came out so easily; I'm also happy that I didn't have to take the engine out. You can see the problem gear. That final drive gear has two broken teeth on it and the little gear that rides on is stripped. What took a small engine shop three months to do, I did in three hours.

metalstudman1 · #15 08-31-2011, 12:13 PM

Well done!!!!

**SYCARMS** · #16 08-31-2011, 12:21 PM

joshstep1 · #17 08-31-2011, 01:23 PM

Thanks y'all!

RedTeam · #18 08-31-2011, 04:07 PM

i think that shop should do the right thing

joshstep1 · #19 08-31-2011, 04:47 PM

And what's that?

joshstep1 · #20 09-01-2011, 09:19 AM

The transmission gears HAVE BEEN ORDERED! (as of yesterday, I just forgot to post it) that was awful on the pricing though

joshstep1 · #21 09-01-2011, 09:37 AM

And I just got the email that it's been shipped!

**SYCARMS** · #22 09-01-2011, 10:31 AM

The pricing is not what is awfull, it is the worth of our dollar against the rest of the world. Everything is going up in price.

TOM

joshstep1 · #23 09-01-2011, 10:49 AM

Yes. And, if I may say this, Mr. Obama is not helping anything.

**SYCARMS** · #24 09-01-2011, 05:48 PM

Well you can't blame Obama like you can't blame Kermit the Frog, for they are both puppets. Its the puppeteers who are to blame. This is why I say all puppets must be voted out and replaced with non puppets (Statesmen). The puppeteers are useless with out their puppets like a Fireman without water. And remember the Republican and Democrat parties are nothing more than the puppet manufactures.

TOM

joshstep1 · #25 09-01-2011, 11:05 PM

So if Obama is a puppet, who's his puppeteer?

**SYCARMS** · #26 09-01-2011, 11:50 PM

The very wealthy and powerful, they stay behind the scenes and many are not even known to the average people. The great military complex for which Eisenhower warned us in his farewell speach. This is why the puppet politician can molest, commit fraud, drive a car into a river leaving a young lady to drown even be an ex KKK Grand Wizzard and still remain in office with never a charge being filed. For these weathy few control the banks, major corporations, news media,ect. When their loyal puppets screw up they come in and clean up the mess and divert the publics attention away, but cross them and you end up like Lincoln, JFK,RFK, MLK,.

TOM

joshstep1 · #27 09-03-2011, 11:11 PM

The parts came in today. I should have it back together next week

joshstep1 · #28 09-05-2011, 05:12 PM

My Carbide is officially back up and running!

...was that a tad bit excessive?... Naaah! I don't think so

metalstudman1 · #29 09-05-2011, 06:30 PM

We're proud of you!!!!! Goes to show you can do it if you try!

**SYCARMS** · #30 09-05-2011, 08:11 PM

joshstep1 · #31 09-05-2011, 11:56 PM

Hahahha thanks y'all!!