|
|
|
|||||||
| Go Kart Engine and Torque Converter Tech Forum for discussing go kart engines and torque converters (Briggs, Tecumseh, Suburu, Comet etc) |
|
|
Thread Tools |
|
#1
05-04-2010, 10:45 PM
|
||||
|
||||
Comet 30 torque converter - driver bushing?
I have a Comet 30 converter on my Yerf 3002. The driver clutch started making a horrible noise, which I think I've isolated to a brass bushing deep between the two walls of the pulleys. As far as I can tell, the bushing's duty is to keep the clutch from squeezing to close together, and possibly throwing the belt.
1.) Do I have the right idea as to the purpose of this bushing? 2.) Do I need to have it in there? 3.) Can I get a bushing without buying a new driver clutch? If so, where? Thanks! |
|
#2
05-05-2010, 12:39 PM
|
||||
|
||||
|
That really serves as almost like a bearing. You can buy them from gokartsrus via part number 14699. They are only a few dollars a piece. I usually buy a few since they tend to wear out. When they do wear out, the belt does tend to be a bit more catchy and can create noise.
|
|
#3
10-14-2011, 01:01 PM
|
|||
|
|||
|
gokartsus wants FIFTEEN dollars to ship one bushing - ummmmm....no!
|
|
#4
10-15-2011, 07:11 PM
|
||||
|
||||
|
Try Tom @ SYCPowersports. American Sportworks offers this bushing as well.
|
|
#5
10-15-2011, 09:09 PM
|
||||
|
||||
|
A $2.50 brass bushing in 2008 is now $5.95 @BMI!!!!! tells you how much brass is worth now!!!!
|
|
#6
10-15-2011, 10:26 PM
|
|||
|
|||
|
it's bronze, brass's cheaper cousin.
i got two off ebay for 12 and change shipped. peace and motor grease, gents |
|
|
