Looking for 530 sprocket and hub for 1" axle

[JoesEdge]

I honestly don't post in here as much as I should, but I'm starting to gather the parts needed for a buggy / kart build.

This is going to be something like a go-kart / mini-buggy. I already have the following:

1. '87 Suzuki GSXR 750 motor (complete)
2. Parts scavenged off old go-kart:

• 36" wide x 1" axle
• wheels and tires (want to go bigger though, up to 18" tall tires)
• Butterfly Steering wheel
• Front bake calipers from above Suzuki

Right now I'm working with the engine / axle combination. I want to get that set before building the rest. The rest should be easy.

I'm looking for a 530 hub and sprocket for the 1" axle. While I'm at it, I'm also looking for a hub and disc brake. One where I can use the hydraulic calipers I have scavenged.

I'm taking a look at hydraulic pedals this weekend and other odds and ends.

Where could I find a good heavy duty sprocket and hub? I want something around 35 - 40 teeth to give me enough low end grunt. I'm not looking for a speed demon. I've entered those numbers into the calculator and that's about right.

I've searched high and low and haven't anything I liked yet. Most stuff looks cheap and easily broken.

Thanks!

[Zapper]

*************.com

[JoesEdge]

Originally Posted by Zapper

*************.com

I think I may have looked there a couple of times. That place has so much stuff it takes forever to sift through it all.

[Zapper]

In my cat.the number you need is1-2124-40e.This is 50pitch with 40 teeth and a 1"bore.They will send you a cat.free.You are right they have a lot of stuff.

[JoesEdge]

Originally Posted by Zapper

In my cat.the number you need is1-2124-40e.This is 50pitch with 40 teeth and a 1"bore.They will send you a cat.free.You are right they have a lot of stuff.

Thanks! Seems like that would do the job.

From what I understand #50 is the same as 530 chain.

I ordered a print catalog and I also downloaded the catalog as well.

They have some pneumatic stuff that I could use for another project.

[Zapper]

You are welcome.I have been thinking about a cb550-4 build.Don't know if now or latter.

[JoesEdge]

Originally Posted by Zapper

You are welcome.I have been thinking about a cb550-4 build.Don't know if now or latter.

Interesting you mention that. I also have a CB400T that I got running. Seems like a good motor for a build. Or, I can just restore the old bike and make it a cafe racer. One of the two.

[Zapper]

And yes they are the same.I have used it before.Also used there chain.Their double chain is also good.

[Zapper]

They are selling fare at this time.My cuz.in Houston has a badass 750 he is working on now.Ck my album of the three wheel with the old 350-4

[JoesEdge]

Originally Posted by Zapper

They are selling fare at this time.My cuz.in Houston has a badass 750 he is working on now.Ck my album of the three wheel with the old 350-4

That is a cool trike!

I almost scored an '81 CB750 DOHC for about 500 bucks, but it was snatched before I can get to it. I keep checking Craigslist for stuff like that.

Okay, so now that I found a sprocket. Now I need a disc brake or two. I plan to use the calipers that I got off the suzuki.

[Zapper]

Northern Tool