|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
||||
|
||||
Coil Mounting
Where do you guys mount your coils? I know they are supposed to mount somewhere on the engine but I can't seem to find out where!
__________________
If the only tool you have is a hammer, Then all your problems look like nails. |
#2
|
||||
|
||||
Mine are all mounted on the frame.
|
#3
|
||||
|
||||
at the moment on a bracket in a pile of wiring zip tied to the frame..
|
#4
|
||||
|
||||
OK Thanks. I made my own plug wire from a spare Accel 8.8 set. I thought these things were a compact design where the coil bolts to the case somewhere.
Made a plate to mount the recifier and cdi today. Getting closer!
__________________
If the only tool you have is a hammer, Then all your problems look like nails. |
#5
|
||||
|
||||
There's a tab cast in the case to the rear and above the stator side that is perfect. I keep the sparkplug wire as short as possible to decrease resistance and fire timing loss. The coil mounted and moving in conjuction with the motor lessens the chance of the plug connections working loose.
|
#6
|
||||
|
||||
If you have the GY6, you can see the mount Ckau is explainuing in the pic of the UNI filter.
http://buggymasters.com/forum/showthread.php?t=2601 |
#7
|
||||
|
||||
Cool!!! I robbed a longer bolt from the cv cover to mount it.
__________________
If the only tool you have is a hammer, Then all your problems look like nails. |
|
|