BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Electrical Tech

Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc)

 
 
Thread Tools
  #1  
Old 09-02-2012, 01:07 PM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default Need help / my yerfdog won't start

hello all here is my issue, hoping someone can help..
was riding yerfdog up a big ramp after i reached the top i shut gocart down
and just rolled backwards.. once i got down to bottom i went to start it up and it would not start. i have tried putting a screw driver accross the starter solinoid relayand i get noting not even a sparc.i have also recharged the battery and i get no clicking sound or anything.. starter is not even clicking.. can any one help..
  #2  
Old 09-02-2012, 06:29 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

Did the spring on your brake safety swith break or the switch fail?-I'd try to by-pass it first to see if that's the issue- just disconnect it and plug the two wires it was plugged into together
  #3  
Old 09-02-2012, 08:12 PM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default

no i have bypassed the last year...
  #4  
Old 09-02-2012, 09:50 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

Check the main fuse
  #5  
Old 09-03-2012, 04:16 PM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default

yeah i checked main fuse which i beleive is the one inside the little electric cdi box correct..
  #6  
Old 09-03-2012, 04:17 PM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default

my son is so bummed out.. we were suppose to go riding this weekend and dam thing won't start...
  #7  
Old 09-03-2012, 08:02 PM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default

yeah fuse looks fine, what else should i look for next.
  #8  
Old 09-04-2012, 09:05 AM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default

hey medalstudman1.. what else should i be looking for ... fuse seems fine......
  #9  
Old 09-04-2012, 12:39 PM
SoapKart SoapKart is offline
Contributor
 

Join Date: Jun 2011
Posts: 144
Default

Have you verified the wires haven't came loose from the switches? That happens to me occasionally.
  #10  
Old 09-04-2012, 12:42 PM
SoapKart SoapKart is offline
Contributor
 

Join Date: Jun 2011
Posts: 144
Default

If your good there I would go through your connections in the electrical box. Pull everything apart and put back together to verify nothing has came loose.
  #11  
Old 09-04-2012, 12:50 PM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default

yeah i checked switches every thing was connected i disconnected and reconnected the switches,ok thanks Soap, i will give that a shot... and go through the electric box
  #12  
Old 09-05-2012, 12:42 PM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default

Looks like i found the problem. Battery wire was push up against engine and melted my positive wire.thanks for all Your help guys

Last edited by COBRAHMA; 09-05-2012 at 01:54 PM.
  #13  
Old 09-05-2012, 01:30 PM
SoapKart SoapKart is offline
Contributor
 

Join Date: Jun 2011
Posts: 144
Default

Glad to hear you found it.
  #14  
Old 09-05-2012, 01:54 PM
COBRAHMA COBRAHMA is offline
Lite Contributor
 

Join Date: Jul 2011
Location: MA
Posts: 47
Default

Sometimes its the stupidest thing....
  #15  
Old 09-05-2012, 02:00 PM
SoapKart SoapKart is offline
Contributor
 

Join Date: Jun 2011
Posts: 144
Default

That's a fact. I've had my fair share of those when working on these toys.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.