BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > FrankenBuggy Tech

FrankenBuggy Tech Unconventional and Home Built Buggy Tech Forum

 
 
Thread Tools
  #1  
Old 07-12-2012, 10:44 PM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default Long Travel GSXR 750 Buggy

Its time to finish this thing. Instead of adding to the other thread Ill start a new one,if anyone wants to see the hole build here is a link.
http://buggymasters.com/forum/showthread.php?t=416

Its a good thing that it took a long time to get to this point because Ive learned a lot and I have new ideas on what i want to do with it.
For the last two years it has had a gy6 150,22'' atv tires and 15'' of travel front and back(yes the swing arm). The steering rack was to long so it had BAD bump steer,so it had limit straps to keep it at around 11'' or so of travel.

Now it will get new aarms front and back,with was 58'' and will be 70'',the right size steering rack,truck wheels and tires,and other goodies.
Attached Images
File Type: jpg wing buggy 046.jpg (3.8 KB, 237 views)
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #2  
Old 07-12-2012, 10:52 PM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

Out back will be a Protodie center with a 60t sprocket 930 cvs.At the wheel will be f-150 outer cv and wheel hubs.
Attached Images
File Type: jpg both buggys 002.jpg (91.9 KB, 40 views)
File Type: jpg both buggys 003.jpg (91.1 KB, 44 views)
File Type: jpg both buggys 001.jpg (93.7 KB, 39 views)
File Type: jpg both buggys 004.jpg (91.8 KB, 37 views)
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #3  
Old 07-12-2012, 10:57 PM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

A few more parts.
Attached Images
File Type: jpg both buggys 005.jpg (93.3 KB, 31 views)
File Type: jpg both buggys 006.jpg (89.4 KB, 28 views)
File Type: jpg both buggys 007.jpg (92.9 KB, 27 views)
File Type: jpg both buggys 009.jpg (92.8 KB, 37 views)
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #4  
Old 07-13-2012, 07:36 AM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

Did you win the lottery?!!!!!
  #5  
Old 07-13-2012, 07:55 AM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

LOL!!No been saving parts for two years,and sold a quad to get the center.The f-150 cv even have some rust on them had them setting in the shop for a year.
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #6  
Old 07-13-2012, 07:58 AM
SoapKart SoapKart is offline
Contributor
 

Join Date: Jun 2011
Posts: 144
Default

Make sure to keep us posted with lots of pics. Building a long travel from scratch with a sport bike powerplant is on my to-do list.
  #7  
Old 07-13-2012, 08:05 AM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

Using the f-150 cv save over half the money of a 930 set up.The hole cv axle is $45,you only use the outer cv and scrap the rest.I know its wasteful but 930 micro stubs are around $140 x2,so a 930 set up wil start at about $720 or so.
The f-150 outer cv goes to 45 deg. the 930s go around 26 deg.
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #8  
Old 07-13-2012, 08:14 AM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

Quote:
Originally Posted by SoapKart View Post
Make sure to keep us posted with lots of pics. Building a long travel from scratch with a sport bike powerplant is on my to-do list.
I have to get the wifes buggy done and out of the shop before I can start on this one and it will not be a fast build.Still need some parts but every thing else is cheep.
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #9  
Old 07-13-2012, 09:53 AM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

I'm all excited for you!!!! hurry up and get the wife's buggy done!!!
  #10  
Old 07-14-2012, 04:36 PM
Rarerat's Avatar
Rarerat Rarerat is offline
Contributor
 

Join Date: Dec 2009
Location: New Mexico
Posts: 456
Default

Very cool, can't wait to see this one up & running
  #11  
Old 11-02-2012, 12:50 PM
SoapKart SoapKart is offline
Contributor
 

Join Date: Jun 2011
Posts: 144
Default

RoySheepDog

How is it going RSD? Did you get the wife's buggy done and move onto your own project yet?
  #12  
Old 11-25-2012, 09:12 AM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

soapkart i got the wifes buggy done but not much on mine.I built an aarm,its a bottom and i think its 22'' long and i think the tops will be 19-20'' long.Added to the bumper or nose to make it a little higher and follow the lines of the side of the buggy better.Cut the roof and a,b,c,pillers off,so I can make the roof 3'' higher.The way it was with a helmet I only had a few '' to the tube from top of helmet.
Ill be back on it in a few weeks and get some pics up.
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #13  
Old 01-02-2013, 10:49 AM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

I dont know what I was thinking about when I said the aarms were 22''.I have done some work on this thing and the aarms are 27 bottom and 24 top.I have one wheel on now and it has 23'' of travel.I have pic. on photo bucket if anyone wants to see,I dont get much of a response on this site, if that changes Ill do more.

http://s1137.beta.photobucket.com/user/mr_bob2/library/
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #14  
Old 01-02-2013, 11:14 PM
SoapKart SoapKart is offline
Contributor
 

Join Date: Jun 2011
Posts: 144
Default

It's looking good. 23" of travel will be nice. What other sites are you active on?
  #15  
Old 01-03-2013, 07:23 AM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default zoom zoom

That looks like something you would run the mint 400 in, bet it will really peel your eyeballs back!
  #16  
Old 01-03-2013, 09:18 AM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

Quote:
Originally Posted by SoapKart View Post
It's looking good. 23" of travel will be nice. What other sites are you active on?
Yea 23 will be nice and thanks SK and Bear for the replys.I wanted to change the look up some and a Baja buggy look is kinda what I going for.SK Im on a lot of buggy sites the buggy is only on one other,it not getting any replys there ether and I have pic up.

http://www.buggycountry.com/forums/8...triple-r-buggy

People are funny some one could learn a lot from watching a build even if it not a yurf,the same work still applies from this to a yurf. It cost less than $8 to build these spindles and I know a trick to do it very easy that anyone could build them for any buggy.Oh well if you questions let me know and check photobucket for new pics from time to time if you want.Im not trying to be a douche but it takes a lot of time to post for no reply, thats not worth my time.
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #17  
Old 01-03-2013, 03:18 PM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

Can't believe u did those spidles for under $10!!!
  #18  
Old 01-03-2013, 04:01 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

c'mon Roy, don't be a scrooge; build threads are no fun without some big server stopping pics in your face!
  #19  
Old 01-03-2013, 07:03 PM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

x bird I took the pic with my phone so they arent very big.

Bear I used 1/8'' flat bar that was $0.98 a foot and used about 3' each one,so it cost about $6 for both spindles.
The wheel hubs are for a ford ranger ifs 4x4,$35 each but yall wont need hubs like that. for a buggy around 700lbs or under 1/16 flat bar would be fine and use what ever yall use for the wheel hub.
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #20  
Old 01-03-2013, 10:47 PM
SoapKart SoapKart is offline
Contributor
 

Join Date: Jun 2011
Posts: 144
Default

Great job on the spindles. What are you using to cut everything out? Are these your own design or are you basing it on something? Is there a specific reason you went with 4x4 hubs? I'm looking forward to more info on your new power plant and IRS setup.

The yerf-dogs are great but it just feeds the desire for something bigger, faster and stronger.
  #21  
Old 01-03-2013, 10:57 PM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

On the spindles I made it out of a folder and taped it together,put it on to see that it fit.Then took the pieces and traced them out on flat bar and cut then out with a torch.I did design them my self.
I used the 4x4 hubs because it is cheep cant break them, they will last for ever on a buggy and I wanted to use dot tires. Dont forget its easy, they bolt on and they will be on the back also.the back are f150 hubs and outer cv are f150, they have the same spline as a 930 cv that I have for the inter.

the motor is a gsxr 750 it makes i think 130hp stock,it has bigger jets 145 i think and after market exaust.The bike was fast it went around to 90 in first gear.
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK

Last edited by roysheepdog; 01-03-2013 at 11:03 PM.
  #22  
Old 01-04-2013, 07:07 AM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

Puttin' together a tru "frankenbuggy"111
  #23  
Old 01-04-2013, 07:09 AM
roysheepdog's Avatar
roysheepdog roysheepdog is offline
Contributor
 

Join Date: Aug 2009
Location: texas
Posts: 402
Default

I would rather not call it a frankenbuggy lol
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668

FABRICATION ITS HARDER THAN YOU THINK
  #24  
Old 01-04-2013, 05:51 PM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

How 'bout B.A.M.B.-Bad -ss mini buggy!!!
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:24 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.