|
Go Kart General Discussion Forum for general go kart discussion. |
|
Thread Tools |
#1
|
|||
|
|||
Tire Slime / Tube Replacement
Anyone used tire slime to slow/stop leaky tubes? I believe my front tire is tubed so I figure it wouldn't hurt to try it. Kinda a pain having to pump the tire up each time I want to ride.
Aside from that, does anyone change their own tubes/tires? Would a a cheap tire iron from HF let my change my own tubes/tires easily enough, or is it not worth the hassle? |
#2
|
||||
|
||||
I haven't had the reason to use Tire Slime yet, but there
are lots of guys that use it. HARBOR FREIGHT (Tire Changers) http://www.harborfreight.com/cpi/cta...emnumber=34552 http://www.harborfreight.com/cpi/cta...emnumber=34542
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10 |
#3
|
||||
|
||||
those front tires are tubeless
|
#4
|
||||
|
||||
I've never been a fan of it. Seems to me it is supposed to be a temporary fix. I've actually seen guys put tires on with the good ol' starter fluid method.
|
#5
|
||||
|
||||
Funny you said that....
I did that Starter Fluid method last weekend. I should of filmed it...dang
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10 |
#6
|
|||
|
|||
I thought that's what you said, but on the parts diagram I think it had tubes for both sets of tires. Maybe the rim is bent or something?
|
#7
|
||||
|
||||
I used it on a tubeless tire once, worked well
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! |
#8
|
||||
|
||||
yeah probably bent, you can get tubes at tractor supply, get them put in, i would take it to a tire shop cause they are a pain to try to do by yourself leave it to the pros
|
|
|