|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
Needing Help
Hi all I'm new here and I just acquired a 05 to 06 vision razor z-2150. I have no information on these karts or mini buggies as some would call. Any information on wiring, engine, carbs any thing would be great and where to find parts would be awsome.
|
#2
|
||||
|
||||
Try. ( razor vision kart-mart.com)
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils. |
#3
|
|||
|
|||
Yeah I found his site today and sent some photos of the breather to see what electrical sensor was on it he said there was not suppose to be one so we will see. Oh and it revs up real hi and wont idle down . Any thoughts?
|
#4
|
||||
|
||||
You may need to adjust ur air/fuel screw. And ur valves
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils. |
#5
|
|||
|
|||
My thoughts are, the throttle cable is not adjusted properly or you have an air leak after the carburetor. Check that the throttle cable is not too tight and check the intake for cracks or leaks at either of the joints.
|
|
|