|
|
|
|||||||
| Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc) |
|
|
Thread Tools |
|
#1
09-21-2013, 10:42 PM
|
|||
|
|||
Trailmaster Horn Question
Hi Folks,
I have a new trailmaster 150 XRX and the green wires for the horns were run to the dash and coiled but not connected to anything. The dealer said they come wired to a button on the dash, but my buggy came with a R-Tech steering wheel with a horn button built in. Any other TM owners wire one of these?
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
|
#2
09-22-2013, 10:35 AM
|
|||
|
|||
Mine had two electrical connection tabs on the backside of the horn button. There is a hole in the steering wheel mounting collar that the two wires got routed through and then plugged into the tabs. Worked like a charm.
__________________
Webb Trailmaster 150 XRX - Uni filter - 124 main jet - 11 gram rollers - red main spring - Iridium plug |
|
#3
09-22-2013, 07:16 PM
|
|||
|
|||
|
Hmm.. I noticed that one wire beeps the horn if connected to medal, the other didn't. So i connected take one and ran the other lead of of the horn button to a wire grounded to the column bolt and it now beeps with the wheel. I'll try what you said, thanks..
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
|
#4
09-28-2013, 06:32 PM
|
|||
|
|||
|
Yup worked like a charm..
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
|
#5
09-28-2013, 06:53 PM
|
|||
|
|||
|
Cool beans glad I could be helpful.
__________________
Webb Trailmaster 150 XRX - Uni filter - 124 main jet - 11 gram rollers - red main spring - Iridium plug |
|
|
