BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > General Mini Buggy and Go Kart Forums > Mini Buggy General Discussion

Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc)

 
 
Thread Tools
  #1  
Old 01-02-2014, 04:28 PM
dougandbeth dougandbeth is offline
Lurker
 

Join Date: Dec 2011
Posts: 8
Default Go Kart Making Loud engine noise after a donut

Hi all,

So as many of you know the kids received a brand new Hammerhead Mudhead from Santa. So took it out this afternoon in about 2 inches of snow and my 8 year old basically stayed in the cul de sac doing donuts and having a blast. Here is what's weird...

After about 10 donuts the engine stalled and started right back up but it seems to be making a very loud knocking noise (sort of like no oil in a car). If you let it sit for a minute and restart the noise goes away however once you get up to a high speed it stalls and knocks again.

Maybe too much gas in the line because of pressing the gas hard on donuts?
  #2  
Old 01-02-2014, 08:24 PM
Dirtroad Dirtroad is offline
Contributor
 

Join Date: Sep 2013
Location: Lowell, Mi
Posts: 110
Default

Did you go through any break in procedures?
__________________
2009 ASW Carbide Uni filter, outerwears, redneck intake, 130 main jet, 38 pilot jet, drilled exhaust, DR Pulley 9g sliders, 2000rpm clutch spring, adjustable CDI and 39T sprocket

2009 ASW Carbide 39T sprocket, DR Pulley 10g sliders, drilled exhaust

2010 ASW Vector bone stock
  #3  
Old 01-02-2014, 08:39 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

i used to do a lot of skidpad testing for cornering g analysis. going in "hard" continual circles can be rough on an engine to say the least. centrifugal force and some oiling systems do NOT work well. he probably loaded the top end of the engine with oil and starved the bottom end. if the engine is knocking now while running in a straight line, either the rod big end or crank main bearings are shot. Don't know if those litle engines run plain bearing or inserts. fwiw, mopar engines were ALWAYS the worst, smoke screen after two laps of the 100'.

Your best bet is to stop right now, no more riding, drain the oil and check for metal.
  #4  
Old 01-03-2014, 06:41 AM
Dirtroad Dirtroad is offline
Contributor
 

Join Date: Sep 2013
Location: Lowell, Mi
Posts: 110
Default

Hammerheads website is conflicting, says the engine has a 180 day warranty but also says it has a 3 year warranty.

Who knows if they would even cover this. Who knows if this was even your fault.

Hopefully you registered the buggy within 14 days or they wont warranty anything.
__________________
2009 ASW Carbide Uni filter, outerwears, redneck intake, 130 main jet, 38 pilot jet, drilled exhaust, DR Pulley 9g sliders, 2000rpm clutch spring, adjustable CDI and 39T sprocket

2009 ASW Carbide 39T sprocket, DR Pulley 10g sliders, drilled exhaust

2010 ASW Vector bone stock
  #5  
Old 01-09-2014, 01:20 AM
Johnny 5's Avatar
Johnny 5 Johnny 5 is offline
Contributor
 

Join Date: Dec 2010
Location: so cal
Posts: 325
Default

What weight oil are you using? if it is cold enough for snow I would run thinner oil.
  #6  
Old 01-09-2014, 08:18 AM
Dirtroad Dirtroad is offline
Contributor
 

Join Date: Sep 2013
Location: Lowell, Mi
Posts: 110
Default

He is probably using what came with it.
__________________
2009 ASW Carbide Uni filter, outerwears, redneck intake, 130 main jet, 38 pilot jet, drilled exhaust, DR Pulley 9g sliders, 2000rpm clutch spring, adjustable CDI and 39T sprocket

2009 ASW Carbide 39T sprocket, DR Pulley 10g sliders, drilled exhaust

2010 ASW Vector bone stock
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:08 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.