|
|
|
|||||||
| Parts For Sale / Wanted All member parts for sale go here regardless of type. |
|
|
Thread Tools |
|
#1
03-12-2014, 11:04 AM
|
|||
|
|||
Like To GY6 for rebuild
As you may have read, my current buggy engine is one of those danged GY6 B type for which I got a Big Bore kit that doesn't fit. I can't get a big bore for it.
I would like to find a GY6 short case engine that has the four bolt valve cover so I can put the Big Bore on it. It doesn't have to have a good jug or piston. It needs to be rebuildable. |
|
#2
03-13-2014, 07:50 AM
|
|||
|
|||
|
Hey,
You might want to check out this store. The "B" gy6 i believe has the 57mm bolt spacing, and this place sells all sorts of hop-up parts for those motors. http://www.SPMOTOSTORE.COM/TAIDA_GY6...-01067-c69.htm
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
|
#3
03-13-2014, 10:38 AM
|
||||
|
||||
|
keep in mind that the big bore kit you bought may require that the engine cases be machined oversize to fit it.
Pre-machined cases are available new. I don't know if it would work, but if the rod, crank, oil pump and transmission parts from the 2-bolt engine will fit in a 4 bolt engine, a less expensive option might be to purchase the machined case sides and swap the 2-bolt guts along with your big bore kit. |
|
#4
03-13-2014, 11:41 AM
|
|||
|
|||
|
yup, same company sells machined cases..
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
|
|
