BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > ATV Dirt Bike and UTV Forums > ATV and Dirt Bike Forum

ATV and Dirt Bike Forum Forum for All ATV’s and Dirt Bikes

 
 
Thread Tools
  #1  
Old 05-05-2014, 02:46 PM
mcgyver mcgyver is offline
Lurker
 

Join Date: Jun 2011
Posts: 20
Default Need a little help with a new to me 1985 Honda FL350R



Fully rebuilt motor, new top and bottom.
TRX450R front end
Simpson Racing Harness
Led Floodlight
New rims and Tires
Spun Aluminum Tank
Stock Fuel Pump
6 Petal Reeds
DG Full Exhaust
  #2  
Old 05-05-2014, 02:49 PM
mcgyver mcgyver is offline
Lurker
 

Join Date: Jun 2011
Posts: 20
Default

Runs Flawless for 10 minutes then acts like the plug fouled and/or detonation.

I have cleaned the carb 4 times. run with and without the pump. turned the air screw from 1 to 1 1/4 to 1 1/2 to 1 3/4 to 2 and 2 1/2 with the same result.

I have no tools for compression or leak down. I know I can rent compression.

  #3  
Old 05-05-2014, 03:18 PM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

Rarerat is your man to talk to about these machines, you should pm him, and see if he can't help!
  #4  
Old 05-06-2014, 07:27 AM
351mustanger 351mustanger is offline
Contributor
 

Join Date: Jul 2013
Location: Cincinnati, Ohio
Posts: 160
Default

Most compression testers have a hose that has a quick connect air fitting on one end and the other end threads into the spark plug hole. You can use this hose to do a leak down test. You will need plugs for the intake and exhaust and an air compressor with regulator. Piston at bottom of the stroke and run no more than 6-8psi.
  #5  
Old 05-06-2014, 08:26 AM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

one area to look into is the entire fuel system from tank to the carb to make sure there isn't any debris that is shifting and blocking the supply once the fuel starts flowing. Likewise, fuel cap vent and if it has a vacuum petcock, those are worth checking to make sure they still function correctly.
  #6  
Old 05-06-2014, 03:59 PM
mcgyver mcgyver is offline
Lurker
 

Join Date: Jun 2011
Posts: 20
Default Fuel delivery

Quote:
Originally Posted by x-bird View Post
one area to look into is the entire fuel system from tank to the carb to make sure there isn't any debris that is shifting and blocking the supply once the fuel starts flowing. Likewise, fuel cap vent and if it has a vacuum petcock, those are worth checking to make sure they still function correctly.
I have changed out the filter to a metal screen filter instead of paper. I installed the fuel pump. everything is super clean. Carb is immaculate inside. My concern is float level and it being able to close under pressure.
  #7  
Old 05-06-2014, 07:57 PM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

I believe proper float level is 18mm, can anybody else confirm this?
  #8  
Old 05-06-2014, 10:10 PM
mcgyver mcgyver is offline
Lurker
 

Join Date: Jun 2011
Posts: 20
Default

No guarantee its the original carb

Kehin pe 37awk??
  #9  
Old 05-06-2014, 10:27 PM
Rarerat's Avatar
Rarerat Rarerat is offline
Contributor
 

Join Date: Dec 2009
Location: New Mexico
Posts: 456
Default

Stock carb is a 32. People change them all the time thinking they will run better and in some cases they will, but personally I'm partial to the stock 32 Keihin. You can jet them in your sleep and when in good condition they preform very well.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:48 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.