|
|
|
|||||||
| 250cc and Above Engine Tech Technical Discussion Forum for 250cc and up Engines |
|
|
Thread Tools |
|
#1
05-27-2014, 07:28 AM
|
|||
|
|||
Normal running temps?
Kind of curious what the normal running temps are on these Hammerhead 250s. When I was out this weekend I wasn't running hard and my temp gauge was reading 200-220 before the fans were kicking on. I thought these were suppose to run around 160-180 from what I have been told. Any input would be appreciated.
__________________
Trailmaster XRX 150  TK Variator and 1500 Spring  SYC Performance Ported & Polished & Shaved 2 Valve Head, A-10 Camshaft, R2C Filter, and Hammerhead Exhaust  Hammerhead 250GTS White Torque and Clutch Springs, 18g Rollers, R2C Filter, Ported Polished and Shaved Head, Hammerhead Exhaust |
|
#3
05-28-2014, 09:24 AM
|
|||
|
|||
|
What kinds of temps are you running bear? The guy I ran into from buggynews this weekend was reading around 180. And they were beating their buggy to snot riding it.
__________________
Trailmaster XRX 150 TK Variator and 1500 Spring SYC Performance Ported & Polished & Shaved 2 Valve Head, A-10 Camshaft, R2C Filter, and Hammerhead Exhaust Hammerhead 250GTS White Torque and Clutch Springs, 18g Rollers, R2C Filter, Ported Polished and Shaved Head, Hammerhead Exhaust |
|
#5
06-02-2014, 06:55 AM
|
|||
|
|||
|
I hear ya. I bought a digital temp gun and am reading about 20 degrees cooler at the sensor on the head and 40+ degrees cooler at the sensor for the fans on the radiator. This is compared to what the Equus gauge is reading.
__________________
Trailmaster XRX 150 TK Variator and 1500 Spring SYC Performance Ported & Polished & Shaved 2 Valve Head, A-10 Camshaft, R2C Filter, and Hammerhead Exhaust Hammerhead 250GTS White Torque and Clutch Springs, 18g Rollers, R2C Filter, Ported Polished and Shaved Head, Hammerhead Exhaust |
|
|
