BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 06-21-2014, 02:46 AM
Bajaman Bajaman is offline
Lurker
 

Join Date: Jun 2014
Posts: 3
Default Baja 150 reaction problem

Hi I am new to this website and to go karts. I got this reaction for 200 bucks. It had no spark so I got a new spark plug, cdi box, and coil. It got spark. So I clean out the carb and put in a new battery and when I start it I have to have the throttle down a little for it to run. If I put the throttle down to hard it stops. If I let It go it stops. I noticed that there is smoke coming from I think the gearbox. I touched it and it was very hot. I don't know what to do anymore. Can someone help?
  #2  
Old 06-21-2014, 08:31 AM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

Welcome Bajaman! have you checked your valve clearances yet, to see if they are right? usually .003 intake & .005 exhaust. also take the gearbox cover off, and see whats up there when it's running! this would just be the first things I'd check.
  #3  
Old 06-21-2014, 03:12 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

sounds like the auto choke might not be working
  #4  
Old 06-23-2014, 04:59 PM
Bajaman Bajaman is offline
Lurker
 

Join Date: Jun 2014
Posts: 3
Default

well I set intake to .003 and .005 exhaust and it will go now but it wont idle and there is still smoke coming from the valve and timing chain cover. im thinking of buying a new auto choke for the idle part. I don't know what to do about the heat from the cover.
  #5  
Old 06-23-2014, 05:43 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

the plastic covers on the engine are actually ductwork for the air-cooling system. they may have a lot of debris up in them. I'd remove them and check what's under them and clean between all the fins on the head/jug.
  #6  
Old 06-25-2014, 03:51 PM
Bajaman Bajaman is offline
Lurker
 

Join Date: Jun 2014
Posts: 3
Default

Well I cleaned the covers and fins and the engine is a little more cooler. It still gets pretty hot
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:41 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.