BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Electrical Tech
Reload this Page No spark
FAQ Calendar Arcade

Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc)

 
 
Thread Tools
  #1  
Old 10-02-2014, 09:17 PM
Sandcrab Sandcrab is offline
Lurker
  

Join Date: Sep 2013
Location: So. Texas
Posts: 21
Default No spark
so I have a crossfire 150r with no spark. It has a new regulator rectifier, starter, cdi, solenoid, fuse. I have power going into the cdi but no power on the blue wire going to the coil. What is causing this?!
  #2  
Old 10-03-2014, 12:58 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
  

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default
check to see if it is getting fire from the stator to the cdi.
  #3  
Old 10-03-2014, 07:04 PM
Sandcrab Sandcrab is offline
Lurker
  

Join Date: Sep 2013
Location: So. Texas
Posts: 21
Default
I have power on red/black going to cdi from stator and on pick up coil.
  #4  
Old 10-04-2014, 12:05 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
  

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default
do you have a wiring diagram for this buggy?
  #5  
Old 10-04-2014, 12:05 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
  

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default
I think I do, I will check now.
  #6  
Old 10-04-2014, 12:16 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
  

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default crossfire 150 parts diagrams
I will post the complete parts manual on here. the wiring diagram is at the end of this manual. hope it helps you.
Attached Files
File Type: pdf CrossFire150PartsManual1.pdf (1.49 MB, 12 views)
  #7  
Old 10-05-2014, 06:08 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
  

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default
What is the AC voltage reading from the trigger wire, usually blue with white tracer?
  #8  
Old 10-06-2014, 03:23 PM
GX150's Avatar
GX150 GX150 is offline
Heavy Contributor
  

Join Date: Dec 2010
Posts: 645
Default
Make sure your kill line to the CDI is NOT grounded and the CDI and coil do have ground returns.
  #9  
Old 10-06-2014, 03:33 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
  

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default
Good Call, forgot about that one
  #10  
Old 10-06-2014, 06:43 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
  

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default
I think we are talking to ourselves lol
  #11  
Old 10-07-2014, 09:07 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
  

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default
I know what you mean. Seems that no one is on here. I myself have been guilty but have been busy.
  #12  
Old 10-22-2014, 10:02 PM
Sandcrab Sandcrab is offline
Lurker
  

Join Date: Sep 2013
Location: So. Texas
Posts: 21
Default
I have replaced the stator so it has pretty much all new electrical parts, but still no spark. I turned the key to test it and it sparked once, then no spark. WTF
  #13  
Old 10-22-2014, 10:19 PM
GX150's Avatar
GX150 GX150 is offline
Heavy Contributor
  

Join Date: Dec 2010
Posts: 645
Default
Ignition switches are known to fail often. Try bypassing yours.
  #14  
Old 10-22-2014, 10:39 PM
Sandcrab Sandcrab is offline
Lurker
  

Join Date: Sep 2013
Location: So. Texas
Posts: 21
Default
But mine is new, should I just connect the wires in the back?
  #15  
Old 10-23-2014, 12:51 AM
Miamieddie's Avatar
Miamieddie Miamieddie is offline
Heavy Contributor
  

Join Date: Jan 2012
Location: miami. florida
Posts: 610
Default
Jump start your ignition relay starter with a screw driver. See what happens. If you also have a safety switch on your brakes try bipassing it also.
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils.
  #16  
Old 10-23-2014, 08:48 AM
Sandcrab Sandcrab is offline
Lurker
  

Join Date: Sep 2013
Location: So. Texas
Posts: 21
Default
Done all that stuff
  #17  
Old 10-23-2014, 10:58 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
  

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default
Make sure you have voltage to the CDI while cranking. If so then this tells you the ign switch is good. Are you sure you have the correct CDI? Yours should be AC. Last ,I have seen it many times when a Stator is replaced the wires are secured incorrectly causing a pinched wire or wire rubbing the flywheel which will cause the signal to go to ground. Also if not already done unplug the wires from the kill switch leaving them hang making sure they don't touch then see if you have spark.
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:47 PM.

Contact Us - BuggyMasters An on line mini buggy forum and go kart forum - Archive - Top

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.