BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 12-01-2014, 12:46 PM
uparms's Avatar
uparms uparms is offline
Lurker
 

Join Date: Sep 2009
Posts: 4
Default Cup the Air Intake and it will run

I have a Helix 150, Will not start. If I cup and throttle with my hand the air intake hose and put resistance on it, it will start and run.

3 years ago had a new fuel petcock valve ( 1 line to fuel and 1 line for vacuum activation).

Buggy only has 30 hours of kid time on 1 acre yard and a few neighborhood short runs. I have thrashed it a few times in the yard.

Hate to swap a carb if that is not needed.

Buggy is 4-5 years old. Garage kept.

I have inspected hoses. I have torqued manifold down. I have installed a new choke. Tightend and reseated air cleaner to carb. Inspected vacum pump.

Does anyone have a vacuum hose diagram??

I want to buy new gaskets for manifold.

Should I put real clamps on each hose??

What would you do?

Any advise appreciated. I hope Delaware snow is coming.

Thanks,

Uparms!

Last edited by uparms; 12-01-2014 at 12:48 PM.
  #2  
Old 12-01-2014, 01:19 PM
liduno liduno is offline
Heavy Contributor
 

Join Date: Aug 2014
Posts: 702
Default

Sounds like you aren't getting enough gas. Clogged jet maybe?
  #3  
Old 12-01-2014, 02:38 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

Check the valves, probably need reset.
  #4  
Old 12-01-2014, 04:17 PM
OLDKID's Avatar
OLDKID OLDKID is offline
Contributor
 

Join Date: Nov 2014
Location: Western N.Y.
Posts: 457
Default

You didn't mention if it's been sitting any great length of time as in bad gas . I've had fuel problem's in as little as 60 day's . When carb. Cleaning a lot of folk's neglect the pilot jet !!!! - not just the oriface , but the removeable tube with the series of tiny holes is prone to plugging . As far as new choke there is also a ballast resistor plus the wireing to question .there is info on this sight to visiually check and measure choke operation .
__________________
2011 BMS KING COBRA 150 Sold
YERF DOG SPIDERBOX's Sold
YERF DOG 3203's. Sold
MANCO SILVER FOX. Sold
2009 POLARIS 500 HO SPORTSMAN 4X4
2002 POLARIS 500 HO SPORTSMAN 4X4
2000 POLARIS MAGNUM 2X4
HALF A DOZEN CHEVY 4X4's
NEED-MO-BUGGY
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:39 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.