BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Electrical Tech

Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc)

 
 
Thread Tools
  #1  
Old 03-02-2015, 10:05 PM
rookiebuggy rookiebuggy is offline
Lurker
 

Join Date: Feb 2015
Posts: 10
Default battery for 250cc?

Hey guys..... This is my 1st post!

Question is, will a 7amp battery work on a 250cc cfmoto?

I know that on the manual is asking to use a 9amp battery, but I bought a 7amp battery yesterday because it was on discount.

This Kandi buggy is a project and once I got home I installed it to see if the starter would turned, but the only thing that happened was the relay clicking and nothing else.

Does it needs the 9amp battery? Or will the 7amp will do it? And maybe there's something else wrong with the buggy that the relay is only clicking.

Please Help!!!!!

Last edited by rookiebuggy; 03-02-2015 at 10:08 PM.
  #2  
Old 03-03-2015, 09:24 AM
GX150's Avatar
GX150 GX150 is offline
Heavy Contributor
 

Join Date: Dec 2010
Posts: 645
Default

9A is the minimum battery for a 250cc and most people go to a larger one. Even my 150's ran 12A and 14A batteries.

Your Kandi does not have a CFmoto 250 with LHNR transmission unless you or some did a swap. It uses a CN250 engine that has the same top end and crank as a CFmoto, but everything past that point is different in the CVT and final transmission.
  #3  
Old 03-03-2015, 11:14 AM
rookiebuggy rookiebuggy is offline
Lurker
 

Join Date: Feb 2015
Posts: 10
Default

You're right on the engine. @GX150.

I guess my real question is... will the battery 7amp work or turn the the starter at less for a few times.

Because with the 7amp battery the only sound it makes is clickin sound coming from the relay. Could it be the battery with low amp?

Today I'm going to jump the starter to make sure ita good and jump the relay as well.
  #4  
Old 03-03-2015, 11:29 AM
GX150's Avatar
GX150 GX150 is offline
Heavy Contributor
 

Join Date: Dec 2010
Posts: 645
Default

The 7A battery should be able to turn over your engine if it was fully charged and your power and ground leads are clean.

Try taking jumper cables directly from the battery to the starter to eliminate the possibility of bad wiring or solenoid. If it still does not crank, measure the battery voltage while connected - Anything bellow 10VDC under load, the battery is not charged or it is faulty. If the battery voltage is fine, make sure the engine can be spun over by hand and has no damage. In this case, your starter may be worn and needs to be replaced.
  #5  
Old 03-03-2015, 12:14 PM
rookiebuggy rookiebuggy is offline
Lurker
 

Join Date: Feb 2015
Posts: 10
Default

Cool.... I'll try it and will let you know.

Thanks for the info!
  #6  
Old 03-03-2015, 05:35 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

does sound like a bad connection
  #7  
Old 03-03-2015, 05:54 PM
rookiebuggy rookiebuggy is offline
Lurker
 

Join Date: Feb 2015
Posts: 10
Default

Did the jump starter and nothing. So best guess it's the starter.

Will order a new one and I'll keep ya updated.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.