BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > FrankenBuggy Tech

FrankenBuggy Tech Unconventional and Home Built Buggy Tech Forum

 
 
Thread Tools
  #1  
Old 08-31-2015, 07:58 PM
blasterbuggy blasterbuggy is offline
Lurker
 

Join Date: Aug 2015
Location: fall river, ma
Posts: 8
Default my frankenbuggy

Hello all! I have been lurking on the sight for a while and decided to share my latest project. I will add some pics asap as I know pics are where its at.

I started with a baja 65, which is a small 2 seater with a 6.5 engine. It had crappy front suspension but a neat independant rear end. I originally installed a 200 cc atv motor, but then a ninja 250 motor came my way with just 1,800 miles on it. So now im installing that in its place. I widened a yamaha blaster front end and then shortened a hyundai steering rack. I used blaster front shocks and air shocks in the rear. Im about halfway done and cant wait to drive it. I got the full wiring harness and cooling system from the ninja. Just need to find the carbs. I will add pics soon. Any input would be great.
  #2  
Old 09-01-2015, 10:22 PM
BuggyMaster's Avatar
BuggyMaster BuggyMaster is offline
Administrator
 

Join Date: Jul 2009
Posts: 2,312
Default

Can't wait to see results!!
  #3  
Old 09-05-2015, 01:06 PM
blasterbuggy blasterbuggy is offline
Lurker
 

Join Date: Aug 2015
Location: fall river, ma
Posts: 8
Default pics, finally

Here we go- pics- took a minute to get them uploaded, lol
Attached Images
File Type: jpg imagejpeg_0t.jpg (81.1 KB, 78 views)
File Type: jpg imagejpeg_4.jpg (78.7 KB, 83 views)
File Type: jpg imagejpeg_3.jpg (81.5 KB, 70 views)
File Type: jpg imagejpeg_1.jpg (79.1 KB, 60 views)
File Type: jpg imagejpeg_2.jpg (85.0 KB, 59 views)
  #4  
Old 09-05-2015, 01:18 PM
blasterbuggy blasterbuggy is offline
Lurker
 

Join Date: Aug 2015
Location: fall river, ma
Posts: 8
Default

Well my wife finally figure out the pics. Dont mind my shop. Its a 10x20 storage locker. The owner lets us work there and supplies the power.
  #5  
Old 09-05-2015, 01:22 PM
blasterbuggy blasterbuggy is offline
Lurker
 

Join Date: Aug 2015
Location: fall river, ma
Posts: 8
Default

The rear tires will be replaced with quad tires. The paddles wont work in the woods where we ride. Still lots to do. Next is finishing the engine mounts, building the chain tensioner, build mounts for radiator, then find some carbs and hear it run.
  #6  
Old 09-06-2015, 10:58 AM
blasterbuggy blasterbuggy is offline
Lurker
 

Join Date: Aug 2015
Location: fall river, ma
Posts: 8
Default

No one has any comments?
  #7  
Old 09-06-2015, 11:24 AM
liduno liduno is offline
Heavy Contributor
 

Join Date: Aug 2014
Posts: 702
Default

I didn't want to sound like a naysayer so I kept my keyboard silent..lol

I was a little worried about the IRS being strong enough, and the suspension being good enough.
  #8  
Old 09-06-2015, 02:20 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Going to be a beast with that engine.
  #9  
Old 09-06-2015, 03:36 PM
scjeep4.7HO scjeep4.7HO is offline
Contributor
 

Join Date: Apr 2015
Location: Virginia
Posts: 197
Default

Should be pretty fun once it's all done
  #10  
Old 09-06-2015, 07:59 PM
blasterbuggy blasterbuggy is offline
Lurker
 

Join Date: Aug 2015
Location: fall river, ma
Posts: 8
Default

Thanks guys, i have used the blaster front suspension before and loved it. Im going to beef up the irs, and for the type of riding we do I think it will work fine. If not, i rebuild it. Its all trial and error for me. I agree the motor should be good, 30 horse geared low should be fun. I will get more pics up soon. Last night i built the front end and started making some body panels.
  #11  
Old 09-08-2015, 09:28 PM
JERSEYDEVIL's Avatar
JERSEYDEVIL JERSEYDEVIL is offline
Supporting Vendor
 

Join Date: Feb 2011
Location: port charlotte fl
Posts: 831
Default


so am i seeing that rear end correctly? it looks like half an axle attached w/ a clevis to a center spool. then a trailing arm attached somehow to the end of the axle close to the wheel. i assume by the pics that the axle is solid from end to end? can't tell how the trailing arm is attached to the axle from the pics though. is it with a regular bearing or is there some king of heim joint happening back there. by the looks the rear wheels will have all kinds of camber change at every point in movement.
as far as what i can see from the trailing arms they are very one dimensional. basically a piece of tubing. i dont see any crossmembers. this might be a big problem with bending especially when a shock gets mounted somewhere in the middle of that. if i'm seeing/not seeing something wrong/right let me know.
__________________

"LUCIFER" JOYNER JD400,
CROSSHAMMER 250R,
YERF GX150,
CROSSFIRE MBX150,
BMS 800V-TWIN
'16 RZR 900s ,
'17 ACE 900XC,
'99KX250,
'94 KDX200,
'18 SSR SR170TX

  #12  
Old 09-10-2015, 07:13 PM
blasterbuggy blasterbuggy is offline
Lurker
 

Join Date: Aug 2015
Location: fall river, ma
Posts: 8
Default

Jersey devil, you are right about the control arms, they are junk. Im building new ones. Thanks
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:48 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.