27" Tires on hammerhead twister 150????

[buggymike1976]

Stock 150 pushing 27 inch mud tires..????

[buggymike1976]

http://m.youtube.com/watch?v=7-9s2XU-Pkk

[jmansracerocket]

awesome video, that buggy looks like it has some good power! to be spinning those tires and getting threw the mud with a 150 .

[buggymike1976]

Thank you

And its a little more than stock 150.. Just 61mm high compression, port&polished titanium springs stainless flat valves..a9 cam and my head is from bbk 63mm...

39 tooth sprocket and internal gear swapped out for biggest/ Lowes gearing I can fit...

[liduno]

I knew it sounded a lot more powerful than my old hammerhead ever sounded..lol

[buggymike1976]

Yes I snuck a little power in there...
Now I'm just trying to find a hole deep enough to see I I float
Cause in front I'm running 25 tall 12 wide with 10 itp alum rims..
Trying to figure out what next for more power...ohhh and who makes a really really really good starter clutch...
Ohhh before I he peps saying clutch upgrade well running good clutch and all..willing to put against Dr pulley up hills any day lol

[liduno]

Strategically placed basketballs will insure floatation..lol

[jmansracerocket]

Originally Posted by liduno

strategically placed basketballs will insure floatation..lol

lmfao!!!!!!!!!

[liduno]

It really works. I used to strap a couple to my 3 wheeler.

[jmansracerocket]

Lol I believe it, its just when I pictured it in my head and thought about it I couldn't stop laughing.

[buggymike1976]

That's awesome..how did you tie them on..

I remember as a kid we use to strap old milk jugs to our bicycles
To make sure they floated after jumping a ramp into lake...

Does any one know if they make a smaller final gear sprocket...

[liduno]

Sometimes you could deflate them to get them where you needed them then inflate, no need to use any thing to keep them in place. Other times a ball net works perfectly, ratchet straps in some places.

Depends on the atv.

PS. Mount them high..lol Too low and you roll over immediately, don't ask me how I know.

[buggymike1976]

Ok so you motioned it so now you to tell us the story..

[liduno]

Not an exciting story really. I mounted 2 balls low on the front forks of an old 200cc 3 wheeler, the back floated fine with just the tires. Slowly entered a pond that I ''thought'' was about 3 feet deep...lol It was deeper than 3 feet, I slowly rolled over about 4 feet from the shore.

[buggymike1976]

Lol...bike didnt get hurt did it lol....
Liduno what cart you run

[liduno]

No real damage, pulled the plug and shot out a little water.

I've had a few buggies, a couple Hammerheads, a Yerfdog, a single seat 250 Coolster, a couple fl350's, a couple fl250's.
At the moment my only dirt toy is a crf 150, the funny part is I wheelie it on asphalt more than I ride it in the dirt..lol Kind if treat it like a stuntbike more than a dirt bike.

[buggymike1976]

Well at least your still able to get out there...

[buggymike1976]

Well at least your still able to get out there...

[liduno]

Really miss having a buggy though.

[buggymike1976]

Messing around in mud...making liduno miss his buggy more...also picked crossfire up for nothing

https://m.youtube.com/watch?v=Dq79jl67-JI

[liduno]

I thought you were gonna get a face full of mud when you looked over your shoulder..lol

[buggymike1976]

Yes....i have learned the hard way multiple times....ill try get video of the rest of that section of woods before I get out to clearing....

[jmansracerocket]

hahah cool video, nice crossfire restoration project

[buggymike1976]

Yes it will be...my first thought/ priority is think of motor
..it has the 150 howit motor but I want bigger for this one like snowmobile
Motor....

[x-bird]

Bump