|
|
|
|||||||
| Parts For Sale / Wanted All member parts for sale go here regardless of type. |
|
|
Thread Tools |
|
#1
05-31-2014, 11:47 AM
|
||||
|
||||
Anyone interested in this stuff??
This is all stuff I'm not using any more, so if you see something you want, let me know. All stock parts from a yerfdog Spiderbox. The Mikuni clone carb is a VM 28mm. The tires are brand new Kenda Scorpion 21 7 8 tires with inner tubes. (I have them overinflated because I'm trying to get them back to natural shape. They were really distorted from shipping when they tie wrapped a bunch of them together in storage containers. Should be no problem once they are mounted on rims.
Koso 14 gram rollers Shocks are from a Honda TRX 200. They mount up perfect on the spiderbox with no mods, but are a little soft for off road. Really good for flat pavement or really light riders.     
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... Last edited by xlint89; 05-31-2014 at 02:49 PM. |
|
#3
05-31-2014, 12:59 PM
|
||||
|
||||
 how much?
__________________
"LUCIFER" JOYNER JD400, CROSSHAMMER 250R, YERF GX150, CROSSFIRE MBX150, BMS 800V-TWIN '16 RZR 900s , '17 ACE 900XC, '99KX250, '94 KDX200, '18 SSR SR170TX |
|
#5
05-31-2014, 02:43 PM
|
||||
|
||||
|
Sorry, should have posted more info when I listed this.
Quote:
Quote:
Quote:
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#6
05-31-2014, 03:07 PM
|
||||
|
||||
|
maybe all shoot me a pm
__________________
"LUCIFER" JOYNER JD400, CROSSHAMMER 250R, YERF GX150, CROSSFIRE MBX150, BMS 800V-TWIN '16 RZR 900s , '17 ACE 900XC, '99KX250, '94 KDX200, '18 SSR SR170TX |
|
#7
05-31-2014, 04:09 PM
|
||||
|
||||
|
PM sent. let me know if interested. Thanks
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#8
06-02-2014, 06:19 PM
|
||||
|
||||
|
There is an agreement in place for the whole lot. Should that fall through, I will let everyone know.
I did also find a Ban Jing performance clutch bell in GC if anyone wants that too. Looks like this one. http://thumbs2.ebaystatic.com/d/l225...BnLAQOCjow.jpg
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#9
06-02-2014, 11:10 PM
|
||||
|
||||
|
Parts are SOLD!!!!!
Thank you
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... Last edited by xlint89; 06-03-2014 at 10:54 PM. |
|
#10
06-03-2014, 10:58 PM
|
||||
|
||||
|
Just found a bunch more stuff. Let me know if interested in this batch.
Stock 150 cyl and piston in good shape Stock crankshaft in good shape A 10, A 11 cam, and stock cams Small muffler from dirt bike Ban Jing clutch bell 6 and 8 pole stators with flywheels  
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#13
06-04-2014, 11:44 PM
|
||||
|
||||
|
My basement is a mess right now, but I'll look.
I have a feeling it just went out with the parts I sent out today. I'll let you know if I find it though.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#15
06-10-2014, 01:23 AM
|
||||
|
||||
|
Sorry dude. I must have shipped it with the parts that sold.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#17
06-13-2014, 07:17 PM
|
||||
|
||||
|
Nobody?
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#18
11-12-2015, 10:18 PM
|
||||
|
||||
|
Back from the dead thread.....
Found some more stuff I'm not using and would like to see it go to someone who will. Please PM me with any questions All parts are for/from a Howhit GY6 150cc 1. 6 pole magneto with flywheel. 3. Ban Jing clutch bell. Black "snowflake" design bell posted in pic above 4. Upgraded battery cable wire. Next size larger then stock. 8 GA I believe it is. 3' of red and 4' of black. (no terminals included) 5. Decompression tube 6: Anyone have a BD heavy duty axle? I have spare hardware for you. Hubs and retainers. (My axle bent, so I stripped the parts from it)
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... Last edited by xlint89; 11-27-2015 at 11:19 PM. |
|
#19
11-13-2015, 07:54 AM
|
||||
|
||||
|
Hi X, i'm looking to convert a 125 to a 150. I'd be after jug, head, piston, cams, valves 8 pole mag and flywheel. 39T sprocket. muffler. I have to double check to see if the stud spacing is the same. I haven't diasassembled the 125 yet.
|
|
#20
11-13-2015, 11:05 PM
|
||||
|
||||
|
Let me know. I'll make you a heck of a deal.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#21
11-14-2015, 07:39 AM
|
||||
|
||||
|
Will do, got hit with a project at work this weekend after our electrician went MIA and blew the timetable for rough electrical and framing inspections ....stopped the job dead in it's tracks. I've got a buttload of boxes and wire to run over the next two days. Should be able to get into the engine by mid week.
|
|
#22
11-16-2015, 11:00 PM
|
||||
|
||||
|
Found some shocks I don't need too.
Photobucket is giving me issues right now. I'll post pics later.,
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#23
11-17-2015, 10:22 PM
|
||||
|
||||
|
pics are up
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#25
11-24-2015, 06:58 PM
|
||||
|
||||
|
It has 54mm spacing
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#26
11-24-2015, 08:09 PM
|
|||
|
|||
|
IHow much for the cams, and clutch bell and 8 pole stator ?
Last edited by scjeep4.7HO; 11-25-2015 at 07:55 AM. |
|
#27
11-25-2015, 01:04 AM
|
||||
|
||||
|
Quote:
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#28
11-25-2015, 07:56 AM
|
|||
|
|||
|
Yes, dang cell phone auto correct.
|
|
#29
11-25-2015, 08:27 PM
|
||||
|
||||
|
Only cam I have available is the A10 $10
Ban Jing clutch bell $20 8 pole magneto/FW $10 I'd do all of that for $40 SHIPPED to lower 48
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#31
11-26-2015, 09:23 AM
|
||||
|
||||
|
X Bird, clear your PM box. I can't send a reply.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#32
11-26-2015, 09:31 AM
|
||||
|
||||
|
Quote:
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#34
11-28-2015, 08:56 AM
|
||||
|
||||
|
Quote:
Anyone interested in this stuff?
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
|
