|
|
|
|||||||
| Go Kart Engine and Torque Converter Tech Forum for discussing go kart engines and torque converters (Briggs, Tecumseh, Suburu, Comet etc) |
|
|
Thread Tools |
|
#1
03-20-2016, 12:28 PM
|
|||
|
|||
Yerf Predator swap - Lining up drive
Bought an old Yerf Dog. I think it is a 3200. I've swapped the Tecumseh for a Predator from Harbor Freight. The problem is that the drive components don't line up. The clutch(?) on the drive shaft is about 3/4" offset to the right of the driven pulley. I guess I could solve it by using a wider spacer on the drive shaft to push the clutch left. Anyone else encountered this problem?
|
|
#3
03-20-2016, 04:00 PM
|
||||
|
||||
I've done that to three 3203's so far , each time a little different . Involved making different spacers', moved slots to the left 1/4" ( gotta watch you don't get driver and belt too close to engine case ) The last one I did I cut a bit off the old crankshaft to make a slug to fill the void in the driver . Grade 8 driver bolt and good washers a must , and most importantly a good straight edge setup to get perfectly aligned or it will eat belts like crazy .
__________________
2011 BMS KING COBRA 150 Sold YERF DOG SPIDERBOX's Sold YERF DOG 3203's. Sold MANCO SILVER FOX. Sold 2009 POLARIS 500 HO SPORTSMAN 4X4 2002 POLARIS 500 HO SPORTSMAN 4X4 2000 POLARIS MAGNUM 2X4 HALF A DOZEN CHEVY 4X4's NEED-MO-BUGGY
|
|
#4
03-20-2016, 05:02 PM
|
||||
|
||||
|
Just had a memory come to me regarding this topic , you have to watch it when moving the slots over , engine can get precariously close to drive chain .
__________________
2011 BMS KING COBRA 150 Sold YERF DOG SPIDERBOX's Sold YERF DOG 3203's. Sold MANCO SILVER FOX. Sold 2009 POLARIS 500 HO SPORTSMAN 4X4 2002 POLARIS 500 HO SPORTSMAN 4X4 2000 POLARIS MAGNUM 2X4 HALF A DOZEN CHEVY 4X4's NEED-MO-BUGGY
|
|
|
