BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Other tech issues

Other tech issues For all other technical issues. Think frame, suspension, steering, brakes, etc

 
 
Thread Tools
  #1  
Old 07-02-2016, 07:54 PM
Omnipotent Omnipotent is offline
Lurker
 

Join Date: Jul 2016
Posts: 1
Default Rockstar gk17 brake switch

Have the above buggie, was working fine then one day was turned off and wouldn't start again. Confirmed power to the brake switch which is attached to the reservoir but won't start when the brake is pressed. So logic stated the brake switch must be the issue. To confirm this I crossed the two wires and sure enough fires run up. Issue is that now I have no brakes....evidently this machine need power to the switch in order for the brakes to work?

So I've searched all over and can't find a replacement break switch, even though the electrical schematic shows a brake switch.

So all of this is stated to ask has anyone else experienced anything like this and any thoughts or ideas on how to fix it? The buggie is for my kids and I can't have them driving using the E-brake so I need to figure out how to fix the issue especially since I can't seem to find a break switch to replace.

Additionally to make sure you understand I'm talking about the master cylinder where the two wires come in, I'm guessing this is a switch but it may not be replaceable without replacing the entire cylinder.

Thanks for any thoughts.

Title is supposed to say roketa, damn autocorrect.

Last edited by Omnipotent; 07-02-2016 at 08:28 PM.
  #2  
Old 07-02-2016, 10:50 PM
Jeckler's Avatar
Jeckler Jeckler is offline
Lurker
 

Join Date: Jun 2016
Location: Mesa, AZ
Posts: 2
Default

The switch is not required for the brakes to work. However, the brakes must be able to produce pressure for the switch to work. Figure out why the brakes stopped working and the switch will (probably) fix itself.
Is there fluid? Have you opened the reservoir, bled them, checked for leaks?
__________________
Andy
Dune 150
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:24 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.