BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Go Kart Engine and Torque Converter Tech

Go Kart Engine and Torque Converter Tech Forum for discussing go kart engines and torque converters (Briggs, Tecumseh, Suburu, Comet etc)

 
 
Thread Tools
  #1  
Old 04-27-2013, 11:23 AM
allen p allen p is offline
Lurker
 

Join Date: Apr 2013
Posts: 3
Default not enough power

I have 6 hp techumseh.not enough power to pull hills.Would it help if I took gov out?
  #2  
Old 04-27-2013, 01:49 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

I would say yes it would help but it would shorten the life of your engine because it is designed to ony turn a set amount of rpm"s and last. it might scream, but its possible it would blow before you get to the top of the hill. who knows? probably better off changing your gearing ie. sprockets.
  #3  
Old 04-27-2013, 04:14 PM
SLESTAK75's Avatar
SLESTAK75 SLESTAK75 is offline
Heavy Contributor
 

Join Date: Dec 2012
Location: Roanoke,VA
Posts: 634
Default

The governor is set up to run it to the rpm range that it produces the most power. After reaching 4500 or so it quickly stop making power although it may rev higher. You could do it and maybe hit the hill at a higher speed but it will lose it just as quick. May be all you need but it will reduce the life of your engine. Changing gearing is the better option if you must climb hills but you will lose top speed. You could always go for a larger engine too.
__________________
MXR TrailBender 160R

SYC Perf head P&P,Matched intake and exhaust, A12 cam, Orange CDI & coil, Motorio pulley, 115mm Variator and lightweight drive face,11gm Sliders, UNI, modded muffler + 200 horsepower

http://www.youtube.com/watch?v=3hx-hEWl10c
I'll take your insults as compliments and blame it on your lack of intelligence.
  #4  
Old 04-27-2013, 05:26 PM
Masteryota's Avatar
Masteryota Masteryota is offline
Senior Member
 

Join Date: Dec 2012
Location: North Florida
Posts: 1,155
Default

With a Tecumseh engine, I wouldn't pull the governer. Too many stories on another forum about the tec's grenading after 5k RPM. Gearing is probly the cheapest way to go, but like stated bfore, you will lose some top end. Bigger engine is also possible, but you have to weigh out what will and will not fit the new power plant( TAV, Clutch, mounting plate, cables, etc...). Does this engine have a clutch, or TAV installed? If clutch only, might consider a comet 30 series, the tecumseh engines are still sought after for their reliability, so helping it out might be a good option.
__________________
ASE Master and Toyota Master Diagnostic Certified
Buggy Building Trainee

'04 Dazon Raider 150 'modded'
  #5  
Old 10-06-2016, 08:21 AM
ramon1 ramon1 is offline
Lurker
 

Join Date: Oct 2016
Location: Kansas city Mo
Posts: 8
Default

I have Subaru engines 169cc (6.5 ). Could I get some direction on How to furfure on how to adjust the gearing ratio with the sprockets.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:24 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.