BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 04-27-2017, 07:57 PM
Campo Campo is offline
Lurker
 

Join Date: Apr 2017
Location: Willowbrook Illinois
Posts: 5
Default Blue smoke when I give it gas

Hi, where do I start. Yanked this old buggy 150 helix of a farm buried in weeds complete wreck, any ways probably hasn't ran in a few years. Got it runnin but it blows blue smoke when I give it gas valves set at .005 lots of ticking in the valve cover wondering if I should do a big bore kit or should I go looking into the valves any insight would be appreciated thanks
  #2  
Old 04-28-2017, 08:51 AM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

sounds like blow-by. if it doesn't clear up, most likely thing is worn out bore. if that's the case, bbk it. if it only happens on start up and goes away, valve guide seals.
  #3  
Old 04-28-2017, 11:07 AM
Campo Campo is offline
Lurker
 

Join Date: Apr 2017
Location: Willowbrook Illinois
Posts: 5
Default

thanks x-bird was not sure at all about the valve seats I been reading about a oil passage tube might be damaged but as you said smoke doesn't go away and it doesn't probably blow by bbk it that's gonna be my first step. now on these bbk if I just change the top end cylinder piston and rings do you know how big I can go without changing the stroke connecting rod to piston someone told me 58.5mm if you know anything about this pleeeezz help advise
  #4  
Old 04-28-2017, 12:19 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

The 58.5 is a drop in kit anything larger you will need to bore the case. If the valves are set at .005 you should barely hear a ticking. I would inspect the head for as to why the valves are loud. Check that the timing chain is tight on cam sprocket. You could have a stretched chain or bad tentioner.
  #5  
Old 04-28-2017, 03:12 PM
Campo Campo is offline
Lurker
 

Join Date: Apr 2017
Location: Willowbrook Illinois
Posts: 5
Default

for sure going to check the chain and tension didn't even check that when I had it open thanks I know the tensioner is spring loaded do you know if the tensioner is adjustable or does the spring load adjust automatically
  #6  
Old 04-28-2017, 04:44 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Should automatically, if not needs replacement. Most of the time it will be a stretched chain.
  #7  
Old 04-30-2017, 10:31 AM
Campo Campo is offline
Lurker
 

Join Date: Apr 2017
Location: Willowbrook Illinois
Posts: 5
Default

So ok now I got oil in exhaust pipe and in muffler took it on a short romp around the house came back and oil dripping off spring that holds the two together and inside the muffler too I know I'm burning oil from blow by but concerned if it's valve related or normal with bad piston/rings ???
  #8  
Old 04-30-2017, 02:09 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

You need to do a compression test.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:32 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.