|
|
|
#1
11-10-2017, 09:49 AM
|
|||
|
|||
Ingntion Switch question
I have a Yerf Dog and the starter solenoid went out. I picked up a universal solenoid and when I check the voltage out of the switch, I do not have 12v to activate it when I turn the key.
I have 2 green wires leaving the switch - when I measure across them I get +12 volts. When I flip the leads I get -12 volts. I am perplexed. There is a brown wire that has a constant 12V when the switch is on. I can hook up an external push button to start but I wanted to use the original key to start. Any advice? Thanks Bigg-o |
|
#2
11-11-2017, 09:50 AM
|
||||
|
||||
Yerf's came with a on/off switch , and a Push Button Start . I don't think your keyed ignition switch is original .
__________________
2011 BMS KING COBRA 150 Sold YERF DOG SPIDERBOX's Sold YERF DOG 3203's. Sold MANCO SILVER FOX. Sold 2009 POLARIS 500 HO SPORTSMAN 4X4 2002 POLARIS 500 HO SPORTSMAN 4X4 2000 POLARIS MAGNUM 2X4 HALF A DOZEN CHEVY 4X4's NEED-MO-BUGGY 
|
|
|
