|
|
|
|||||||
| Other tech issues For all other technical issues. Think frame, suspension, steering, brakes, etc |
|
|
Thread Tools |
|
#1
08-17-2018, 09:43 AM
|
||||
|
||||
Spiderbox steering question
Do all spiderbox karts have a really crappy left turning radius at low speed? Turning to the right seems fine but left turns are horrible, this thing couldn't do a left U turn on a two way street without going up on the sidewalk and its driving me crazy trying to figure out why. The previous owner apparently hit something with the right side and not knowing what parts he may have repaired/replaced I'm trying to get a baseline of the steering on it so I have a starting point, it has a 3" lift installed on it with the ATV hubs and bigger tires and HD ball joints if that makes any difference, I've also had to go thru the front end redo it because the lift kit was installed badly which supports my theory "just because you own a set of tools, that does not make you a mechanic"
__________________
2004 Yerf Dog GX150 (on going project) Hammerhead performance exhaust and intake with UNI filter, 3" lift, HD ball joints, ATV hubs and tires, Baki Performance coil and cdi, NGK Platinum plug, LED lights, Lithium battery. |
|
#2
08-17-2018, 09:34 PM
|
||||
|
||||
 yep buddy, just like we talked about.
__________________
"LUCIFER" JOYNER JD400, CROSSHAMMER 250R, YERF GX150, CROSSFIRE MBX150, BMS 800V-TWIN '16 RZR 900s , '17 ACE 900XC, '99KX250, '94 KDX200, '18 SSR SR170TX |
|
#3
08-18-2018, 12:26 AM
|
||||
|
||||
|
I'm going to attempt to cut extra teeth into the one side of the rack, that way I can at least get it to the trails at the back of my property...to check the carb jetting...
__________________
2004 Yerf Dog GX150 (on going project) Hammerhead performance exhaust and intake with UNI filter, 3" lift, HD ball joints, ATV hubs and tires, Baki Performance coil and cdi, NGK Platinum plug, LED lights, Lithium battery. |
|
#4
08-22-2018, 04:55 PM
|
||||
|
||||
|
There comes a time when your trying to correct other peoples mistakes on a build, that you just need to tear it down and start over from scratch...lol
__________________
2004 Yerf Dog GX150 (on going project) Hammerhead performance exhaust and intake with UNI filter, 3" lift, HD ball joints, ATV hubs and tires, Baki Performance coil and cdi, NGK Platinum plug, LED lights, Lithium battery. |
|
|
