BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 04-26-2021, 05:45 PM
shadow21 shadow21 is offline
Lurker
 

Join Date: Apr 2021
Posts: 11
Default buggy wont shut off

i'm having a issue where my buggy will continue to run when i turn the key off and i have to pull the coil off the plug to stop the engine. i just replaced the cdi and ignition switch. any help would be appreciated.
  #2  
Old 04-26-2021, 10:15 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

What type of buggy or what type of engine?
  #3  
Old 04-27-2021, 05:18 AM
shadow21 shadow21 is offline
Lurker
 

Join Date: Apr 2021
Posts: 11
Default

Hammerhead 150 gt with gy6 150cc
  #4  
Old 04-27-2021, 01:25 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

There is a black wire with a white stripe that shuts the motor off or kill wire.This wire comes out of the CDI and has to be connected to a momentary button/kill switch.
  #5  
Old 04-27-2021, 02:05 PM
shadow21 shadow21 is offline
Lurker
 

Join Date: Apr 2021
Posts: 11
Default

The buggy has a kill switch but even that doesn't work
  #6  
Old 04-28-2021, 07:25 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

Did the kill switch get wired back to the black w/white stripe wire on the kill switch? You need to follow that wire back to the electric box and confirm it's connected. There is a green (ground) wire that goes with the black/white wire to make the connection.The new ignition/CDI may not have the same wiring colors, you need to know what each wire does to know what wire to connect it with the black/white wire.
  #7  
Old 04-29-2021, 05:26 AM
shadow21 shadow21 is offline
Lurker
 

Join Date: Apr 2021
Posts: 11
Default

The kill switch worked before and i have not messed with the wiring so it is still stock but I will check that wires connection and I know what each prong on the cdi does but I'll double check the wires are going to the right locations
  #8  
Old 04-29-2021, 06:28 PM
shadow21 shadow21 is offline
Lurker
 

Join Date: Apr 2021
Posts: 11
Default

everything is connected right
  #9  
Old 04-29-2021, 08:39 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

Is the CDI an exact replacement?Is the ignition an exact replacement? You can test the kill switch by simply running the black/white stripe wire to ground.
  #10  
Old 05-01-2021, 07:15 AM
shadow21 shadow21 is offline
Lurker
 

Join Date: Apr 2021
Posts: 11
Default

both are exact replacements and i ran that wire to ground and nothing happened
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:23 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.